User manual HOTPOINT HB 0703 AB0

[. . . ] Speed-adjusting dial ON/OFF button Turbo button Motor unit Blender attachment Beaker (only on some models) Whisk attachment (only on some models) Food pusher (only on some models) Storage unit (only on some models) Big bowl lid (only on some models) Feed tube (only on some models) Big chopper blade (only on some models) Big bowl (only on some models) Shredding/slicing disc (fine) (only on some models) Shredding /slicing disc (coarse/thick) (only on some models) Disc shaft (only on some models) Small bowl lid (only on some models) Small chopper blade (only on some models) Small bowl (only on some models) • INTRODUCTION Thank you for purchasing our product. In doing so, you have opted for an effective high-performance appliance. these operating instructions refer to various models. An overview of the different models can be found on the illustrated pages. [. . . ] Then put the fruit pieces or vegetables into the beaker. Usually a certain amount of water has to be added to facilitate smooth running, the proportion of food and water being 2:3. The mixture amount should not 13 en it 3. Plug the appliance into the power outlet. Lower the hand blender into the food and rotate the speed-adjusting dial to select the desired speed. Pressing and holding the ON/OFF button, the blender starts blending immediately. For maximum-speed blending use the TURBO button for a short time. USING THE FOOD PROCESSOR ATTACHMENT (D) To use the chopping bowl (only on some models): 1. First of all make sure the non-slip ring is fixed to the bottom of the bowl. Fit the knife blade on the pin in the bowl - always fit the knife blade before adding the ingredients. Cut the food into small pieces and put them into the bowl. A small amount of water can facilitate the smooth running of the appliance. Align the two fasteners of the bowl lid with the two clip positions of the bowl and push down to lock them in place. Be sure to align the arrow on the lid and the arrow on the bowl. USE THE WHISK ATTACHMENT (only on some models) (B) The whisk attachment is mainly suitable for whisking egg whites. To assemble the whisk attachment to the motor unit, turn the stem clockwise until tightened. Plug the appliance into the power outlet. Lower the whisk into the food and rotate the speed-adjusting dial to select the desired speed. Pressing and holding the ON/OFF button, the attachment starts whisking immediately. For maximum-speed whisking use the TURBO button for a short time. The fasteners must be locked in the two clip positions, otherwise during operating the bowl lid may rotate as the motor rotates. Make sure the food pusher is properly fitted into its housing on the cover. [. . . ] Rotate the speed-adjusting dial to select the desired speed. Pressing and holding the ON/ OFF button, the attachment starts chopping immediately. For maximum speed press the TURBO button for a short time. Wash the blender attachments and lids under running water without any abrasive cleaners or detergents. [. . . ]