User manual HOTPOINT HTM 1720 V

[. . . ] IMPORTANT TO BE READ AND OBSERVED Before using the appliance carefully read these safety instructions. Keep them close at hand for future reference. These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inapropriate use of the appliance or incorrect setting of controls. [. . . ] ENERGY SAVING TIPS Install the appliance in a dry, well ventilated room far away from any heat source (eg. ) and in place not exposed directly to the sun. Insufficient ventilation on back of the product increases energy consumption and decreases cooling efficiency. The internal temperatures of the appliance may be affected by the ambient temperature, frequency of door opening, as well as location of the appliance. Temperature setting should take into consideration these factors. When thawing frozen food, place them in the refrigerator. The low temperature of the frozen products cools the food in the refrigerator. Allow warm food and drinks to cool down before placing in the appliance. Positioning of the shelves in the refrigerator has no impact on the efficient usage of energy. Food should be placed on the shelves in such way to ensure proper air circulation (food should not touch each other and distance between food and rear wall should be kept). You can increase storage capacity of frozen food by removing baskets and, if present, Stop Frost shelve, maintaining an equivalent energy consumption. High energy class products are fitted with high efficiency motors that remain operational for longer, but have a low power consumption. Do not worry if the engine continues to run for longer periods. This appliance has been designed, constructed and distributed in compliance with the requirements of European Directives: LVD 201/35/EU, EMC 2014/30/EU and RoHS 2011/65/EU. This appliance has been designed, constructed and distributed in compliance with the Ecodesign and energy Labeling Requirements of EC Directives: 2009/125/EC and 2010/30/EU. Fan for versions with this device This illustration is only for hinting, for the detail please check your appliance. This appliance is a refrigerator with a compartment. Defrosting of the refrigerator compartment is completely automatic. Switching on the refrigerator for the first time Insert the plug into the mains socket. The thermostat is used to adjust the temperature of both compartments: refrigerator and freezer. How to adjust the temperature of the compartments: 1. For correct operation and optimum storage of food, follow Instructions given in the enclosed p roduct sheet for thermostat adjustment. [. . . ] Make the middle hinge reverse the direction180oC, then transfer it to the left property position. Make the middle hinge pin in the upper hole of the lower door, then tight the bolts. Ensure the door is aligned horizontally and vertically so that the seal are closed on all sides before finally tightening the top hinge. Then inert the top hinge and screw it to the top of unit and then fix hinge cover (in accessary bag) by screw. [. . . ]