User manual HOTPOINT KIA 641 C

[. . . ] 24 Operating Instructions HOB Contents Installation, 26-28 Positioning Electrical connection GB IT Italiano, 1 FR Français, 13 GB English, 25 Description of the appliance, 29 Control panel DE Deutsch, 37 ES Espanol, 49 KIA 641 C KIC 641 X KIC 642 C KIC 644 X KIC 644 DD Z Switching on the hob Switching on the cooking zones Booster function Switching off the cooking zones Programming the cooking duration Timer Control panel lock Switching off the hob “Demo” mode Practical advice on using the appliance Safety devices Practical cooking advice Start-up and use, 30-33 General safety Disposal Precautions and tips, 34 Care and maintenance, 35 Switching the appliance off Cleaning the appliance Disassembling the hob Technical description of the models, 36 Installation GB this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.  Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance. [. . . ] If the booster for the rear left-hand hotplate has been activated, the power level of the front left-hand hotplate will be reduced). For further information, please refer to the Technical description of the models. At step 2, press the duration decreases progressively until it reaches 0 and switches off. The programme resets and the display exits programming mode. - • Press and hold the button: the simultaneously for 6 seconds. When the 6 seconds have elapsed, the ON/OFF and CONTROLS LOCKED indicator lights will flash for one second. Release the press the button; + and buttons GB Timer The hob must be switched on. The timer can be used to set a duration up to 99 minutes. Press the programming button until the timer indicator light is illuminated. Set the desired duration using the buttons. Confirm by pressing the + and buttons and • The display will show the text DE and MO and the hob will be switched off. • When the hob is switched on again it will be set to the “demo” mode. To exit this mode, follow the procedure described above. The display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally. The timer begins counting down immediately. When the time has elapsed, a buzzer will sound (for one minute). Practical advice on using the appliance  Use cookware made from materials which are compatible with the induction principle (ferromagnetic material). We especially recommend pans made from: cast iron, coated steel or special stainless steel adapted for induction. Use a magnet to test the compatibility of the cookware. SUITABLE UNSUITABLE Control panel lock When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc. Press the button to lock the control panel: the indicator light above the button will switch on. [. . . ] Stainless steel frame (only in models with outer frame) Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. After cleaning, it is advisable to rinse the surface well and dry it thoroughly. If water is spilt on the surface, dry it quickly and thoroughly. Some hobs have an aluminium frame which is GB Cleaning the appliance example, products in spray cans for cleaning barbecues and ovens), stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratch the surface beyond repair. [. . . ]