User manual HOTPOINT KIC 631 T B

[. . . ] 22 Operating Instructions HOB Contents Installation, 24-25 Positioning Electrical connection GB IT Italiano, 1 FR Français, 12 GB English, 23 Description of the appliance, 26 Control panel DE Deutsch, 34 ES Espanol, 45 KIC 631 C KIC 631 T B KIC 631 T X KIC 633 T Z Switching on the hob Switching on the cooking zones Booster function Switching off the cooking zones Programming the cooking duration Timer Control panel lock Switching off the hob “Demo” mode Practical advice on using the appliance Safety devices Practical cooking advice Start-up and use, 27-30 General safety Disposal Precautions and tips, 31 Care and maintenance, 32 Switching the appliance off Cleaning the appliance Disassembling the hob Technical description of the models, 33 Installation GB  Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.  Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance. [. . . ] For further information, please refer to the Technical description of the models. - Programming the cooking duration  All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. Select the cooking zone using the corresponding selector button. The display scrolls quickly though the power levels and timer minutes. - + or button is pressed for an extended period of time, Switching on the hob To switch the hob on, press and hold the approximately one second. The timer begins counting down immediately. Repeat the above procedure for each hotplate you wish to programme. 27 GB Using multiple programmes and the display If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To display the time remaining for the other programmed hotplates, press the button repeatedly. The times remaining for each hotplate will be shown in a clockwise order, beginning with the front left hotplate. Use the button repeatedly until the duration you wish to buttons to set the new duration. Switching off the hob Press the button to switch the appliance off. If the control panel lock has been activated, the controls will continue to be locked even after the hob is switched on again. In order to switch the hob on again, you must first remove the lock function. “Demo” mode It is possible to set the hob to a demonstration mode where all the controls work normally but the heating elements do not switch on. To activate the “demo” mode the hob must be switched on, with all the hotplates switched off. When the 6 seconds have elapsed, the ON/OFF and CONTROLS LOCKED indicator lights will flash for one second. Release the • The display will show the text DE and MO and the hob will be switched off. • When the hob is switched on again it will be set to the “demo” mode. To exit this mode, follow the procedure described above. When the safety switch has been triggered, the display shows “0”. [. . . ] Stainless steel frame (only in models with outer frame) Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. After cleaning, it is advisable to rinse the surface well and dry it thoroughly. If water is spilt on the surface, dry it quickly and thoroughly.  Some hobs have an aluminium frame which is Cleaning the appliance example, products in spray cans for cleaning barbecues and ovens), stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratch the surface beyond repair. [. . . ]