User manual HOTPOINT KIO 642 DD Z

[. . . ] 22 Operating Instructions HOB Contents IT Italiano, 1 GB FR Français, 12 GB English, 23 Installation, 24-25 Positioning Electrical connection Control panel Description of the appliance, 26 Start-up and use, 27-30 DE Deutsch, 24 ES Espanol, 45 KIO 644 DD Z KIO 642 DD Z KIO 744 DD Z Switching on the hob Switching on the cooking zones Booster function Switching off the cooking zones Programming the cooking duration Timer Control panel lock Switching off the hob “Demo” mode Practical advice on using the appliance Safety devices Practical cooking advice General safety Disposal Precautions and tips, 31 Care and maintenance, 32 Switching the appliance off Cleaning the appliance Disassembling the hob Technical description of the models, 33 Installation GB this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.  Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance. [. . . ] The booster stops automatically after 4 minutes. While the booster for one of the cooking zones is active, the corresponding front or rear cooking zone will operate at a reduced power level (e. confirm by pressing the To cancel a programme , follow the above instructions. At step 2, press the duration decreases progressively until it reaches 0 - button: the 27 GB and switches off. The programme resets and the display exits programming mode. Release the press the button; + and buttons and Timer The hob must be switched on. The timer can be used to set a duration up to 99 minutes. Press the programming button until the timer indicator light is illuminated. Set the desired duration using the buttons. Confirm by pressing the • The display will show the text DE and MO and the hob will be switched off. • When the hob is switched on again it will be set to the “demo” mode. To exit this mode, follow the procedure described above. The display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally. Practical advice on using the appliance  Use cookware made from materials which are compatible with the induction principle (ferromagnetic material). We especially recommend pans made from: cast iron, coated steel or special stainless steel adapted for induction. Use a magnet to test the compatibility of the cookware. sUITABLE UNSUITABLE The timer begins counting down immediately. When the time has elapsed, a buzzer will sound (for one minute). Control panel lock When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc. Press the button to lock the control panel: the indicator light above the button will switch on. To stop cooking), you must switch off this function. [. . . ] Stainless steel frame (only in models with outer frame) Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. After cleaning, it is advisable to rinse the surface well and dry it thoroughly. If water is spilt on the surface, dry it quickly and thoroughly.  Some hobs have an aluminium frame which is Cleaning the appliance example, products in spray cans for cleaning barbecues and ovens), stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratch the surface beyond repair. [. . . ]