User manual HOTPOINT KIO 744 DO B

[. . . ] 22 Operating Instructions HOB Contents IT Italiano, 1 GB FR Français, 12 GB English, 23 Installation, 24-25 Positioning Electrical connection Control panel Description of the appliance, 26 Start-up and use, 27-30 DE Deutsch, 24 ES Espanol, 45 KIO 644 DD Z KIO 642 DD Z KIO 744 DD Z KIO 744 DO B Switching on the hob Switching on the cooking zones Booster function Switching off the cooking zones Programming the cooking duration Timer Control panel lock Switching off the hob “Demo” mode Practical advice on using the appliance Safety devices Practical cooking advice General safety Disposal Precautions and tips, 31 Care and maintenance, 32 Switching the appliance off Cleaning the appliance Disassembling the hob Technical description of the models, 33 Installation GB  Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.  Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance. [. . . ] For further information, please refer to the Technical description of the models. Programming the cooking duration  All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. Select the cooking zone using the corresponding selector button. Period of time, the display scrolls quickly though the power levels and timer minutes. - + or button is pressed for an extended 27 GB 4. Set the cooking duration using the buttons. When the time has elapsed, a buzzer will sound (for one minute). The timer begins counting down immediately. Repeat the above procedure for each hotplate you wish to programme. Using multiple programmes and the display If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To display the time remaining for the other programmed hotplates, press the button repeatedly. The times remaining for each hotplate will be shown in a clockwise order, beginning with the front left hotplate. Use the button repeatedly until the duration buttons to set the new duration. Control panel lock When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc. Press the button to lock the control panel: the indicator light above the button will switch on. To stop cooking), you must switch off this function. Press the button for a few moments, the indicator light will switch off and the lock function will be removed. Switching off the hob Press the button to switch the appliance off. If the control panel lock has been activated, the controls will continue to be locked even after the hob is switched on again. In order to switch the hob on again, you must first remove the lock function. “Demo” mode It is possible to set the hob to a demonstration mode where all the controls work normally but the heating elements do not switch on. [. . . ] Stainless steel frame (only in models with outer frame) Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. After cleaning, it is advisable to rinse the surface well and dry it thoroughly. If water is spilt on the surface, dry it quickly and thoroughly.  Some hobs have an aluminium frame which is Cleaning the appliance example, products in spray cans for cleaning barbecues and ovens), stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratch the surface beyond repair. [. . . ]