User manual HOTPOINT L 6063 EU

[. . . ] 12 Instruction booklet DISHWASHER Contents Installation, Positioning and levelling Connecting the water and electricity supplies Technical data EN English, 13 EN 14-15 Description of the appliance, 16 Overall view Control panel Loading the racks, 17 Lower rack Cutlery basket Upper rack Start-up and use, L 6061 L 6063 Starting the dishwasher Loading the detergent 18 Wash cycles, 19 Wash cycle table Rinse aid and refined salt, Loading the rinse aid Loading the refined salt 20 Care and maintenance, 21 Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the filters Leaving the machine unused for extended periods Precautions and advice, 22 General safety Disposal Saving energy and respecting the environment Troubleshooting, Assistance, 24 23 Before calling for Assistance Installation EN !Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance. [. . . ] When the cycle requires 1 tablet, place it in compartment A and close the cover; when it requires 2, place the second tablet at the bottom of the appliance. Remove detergent residues from the edges of the compartment and close the cover until it clicks. Ariston dishwashers are fitted with an automatic filter cleaning system that may increase the cycle duration. The number and type of wash cycles varies according to the model of dishwasher. EN :DVK F\FOH VHOHFWLRQ LQVWUXFWLRQV :DVK F\FOH 3RZGHU $ % 'HWHUJHQW FRPSDUWPHQW $ FRPSDUWPHQW % /LTXLG 7DEOHWV 1 (A) 1 (bottom of the appliance) 3UHZDVK 'U\LQJ :DVK F\FOH GXUDWLRQ WROHUDQFH “  Extremely soiled dishes and pans (not to be used for delicate items). Normal Environmentally-friendly wash cycle with low energy consumption levels, suitable for pans and dishes. Economic and fast wash cycle to be used for lightly soiled dishes. ) Preliminary wash cycle for dishes while the load is awaiting completion with the dishes from the next meal. Illuminated light: add rinse aid; unlit light: there is no shortage of rinse aid in the dispenser. €¢ when the LOW RINSE AID* indicator light on the panel flashes; 1. Open the dispenser by H turning the lid (G) in an anticlockwise direction. Pour in the rinse aid, making sure it does not F overflow from the dispenser. If this happens, G clean the spill immediately with a sponge. Adjusting the amount of rinse aid If you are not completely satisfied with the washing or drying results, you may adjust the quantity of rinse aid used. Use a screwdriver to turn the dosage adjuster to one of the 6 pre-set positions (the default position is set to 4): • if there are white streaks on the crockery, set the adjuster to a lower number (1-3). €¢ if drops of water remain on the crockery or there are limescale marks present after the cycle has finished, set the adjuster to a higher number (4-6). If you are using multi-functional tablets (2-in-1, 3-in-1, 4-in-1, etc. ) and you wish to further improve the drying performance of the appliance, fill the dispenser and set the dosage adjuster to 2. 9 6DOW $XWRQRP\ 6HOHFWRU FRQVXPSWLRQ F\FOHV NQRE SRVLWLRQ JUDPVF\FOH  NJ / MED + 0 20 40 60 / 60 40 25 Loading the refined salt In order to obtain the best possible results from a wash cycle, make sure that the dispenser is never empty. Refined salt removes limescale from the water, thus avoiding the formation of deposits on crockery. The salt dispenser is located in the lower part of the dishwasher (see Description) and should be filled: 20 The default setting of the water softening system is +. - If using multi-functional tablets (2-in-1, 3-in-1, 4-in-1) fill the salt dispenser and set the adjuster to -; if the hardness of the water is greater than 60°fH, set it to +. [. . . ] €¢ The rinse aid has been used up or the dosage is too low ( see Rinse aid and salt ). • The rinse aid dispenser setting is not high enough. €¢ A wash cycle without a drying programme has been selected. €¢ The racks are overloaded ( see Loading the racks ). [. . . ]