User manual HOTPOINT LFD 11H133 DE/SK

[. . . ] Operating instructions DISHWASHER EN English, 1 DE Deutsch, 15 NO Norsk, 29 Contents Product Fiche, 2 Precautions and advice, 3 General safety Disposal Saving energy and respecting the environment Assistance EN SE Svenska, 42 DA Dansk, 57 FI Suomi, 71 Installation and Assistance, 4-5 LFD 11H133 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Switching the appliance on for the first time Selecting the language Settings button Child safety lock Description of the appliance, 6 Overall view Control panel Loading the racks, 7-8 Lower rack Cutlery basket Upper rack Cutlery tray* Adjusting upper rack Start-up and use, 9 Starting the dishwasher Measuring out the detergent Wash cycles, 10 Table of wash cycles Special wash cycles and Options, 11 Rinse aid and refined salt, 12 Measuring out the rinse aid Measuring out the refined salt Care and maintenance, 13 Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods Troubleshooting, 14 1 Product Fiche EN Product Fiche Brand Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) Energy consumption per year in kWh (2) Energy consumption of the standard cleaning cycle in kWh Power consumption of the off-mode in W Power consumption of the left-on mode in W Water consumption per year in litres (3) Drying efficacy class on a scale from G (low efficacy) to A (high efficacy) Programme time for standard cleaning cycle in minutes The duration of the left-on mode in minutes Noise in dB(A) Re 1pW Built-in model HOTPOINT ARISTON LFD 11H133 14 A+++ 237. 0 A 190’ 10 43 No NOTES 1) The information on the label and fiche relates to the standard cleaning cycle, this programme is suitable to clean normally soiled tableware and it is the most efficient programme in terms of combined energy and water consumption. The standard cleaning cycle corresponds to the Eco cycle. 2) Based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. [. . . ] The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery. Wash spread over the two racks: delicate on upper rack and heavy-duty for pans on lower rack. Cycle for delicate items, which are more sensitive to high temperatures 35 gr/ml – 1 Tab 7. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab 8. Pre-wash while awaiting completion of the load with the dishes from the next meal. Dishwasher cleaning cycle to be used when the dishwasher is EMPTY with special detergents. 10 Special wash cycles and Options Notes: Optimum performance levels when using the “Fast" and "Express 30’” cycles can be achieved by respecting the specified number of place settings. To reduce consumption even further, only run the dishwasher when it is full. Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: ASSISTENZA_EN_LVS@indesitcompany. com Multi-functional tablets (Tabs) This option optimises washing and drying results. When using multi-functional tablets, press the MULTIFUNCTIONAL TABLETS button; the corresponding symbol will light up. If the button is pressed again, the option will be deselected. The “Multi-functional tablets” option results in a longer wash cycle. The use of tablets is only recommended for models having this option and it is not recommended with wash cycles which do not specify the use of multi-functional tablets. EN Wash options The OPTIONS may only be set, changed or reset after the wash cycle has been selected and before the Start/ Pause button has been pressed. Only the options which are compatible with the type of wash cycle set may be selected. If an option is not compatible with the selected wash cycle (see Table of wash cycles), the corresponding symbol flashes rapidly 3 times. If an option is selected which is not compatible with another (previously selected) option, it will flash 3 times and switch off, while the most recently selected option will remain active. To deselect an option which has been set by mistake, press the corresponding button again. Zone Wash This option makes it possible to carry out the wash cycle in the selected rack only. Select the wash cycle and then press the ZONE WASH button: the selected rack lights up and the wash cycle starts in the selected rack only. [. . . ] Merknad for testlaboratoriene: Opplysninger om betingelsene for EN-sammenligningstesten kan fås ved å sende en forespørsel til e-postadressen: ASSISTENZA_EN_LVS@indesitcompany. Det anbefales ikke for programmer som ikke er beregnet for vasketabletter. Trykk på piltastene for UTSATT START, og velg når du ønsker at vaskesyklusen skal starte (om 1 time, 2 timer, osv. Funksjon for ekstra tørking (Extra Dry) Trykk på tasten for EKSTRA TØRKING for å få enda bedre tørking av serviset. [. . . ]