User manual HOTPOINT LFD 11M121 OCX EU

[. . . ] This appliance is designed for domestic use or similar applications, for example: - staff kitchen areas in shops, offices and other work environments; - farmhouses; - use by guests in hotels, motels and other residential settings; - bed & breakfasts. € Keep detergent and rinse aid out of reach of children. € The packaging material should not be used as a toy for children. Disposal General safety • The appliance should not be operated by people (including children) with reduced physical, sensory or mental capacities, or by inexperienced people who are not familiar with the product, unless supervision or instructions on how to use it are provided by someone who assumes responsibility for their safety. [. . . ] To achieve the best results from each washing and drying cycle, powder detergent, liquid rinse aid and salt should be used. Adding extra crockery Press the Start/Pause button: the display shows PAUSE. Open the door, taking care to avoid the escaping steam, and place the crockery inside the dishwasher. Press the Start/Pause button: the cycle starts from the point at which it was interrupted. If the delayed start has been set, at the end of the countdown the wash cycle will not start. Press the Start/Pause symbol to pause the machine; the wash cycle is stopped. At this stage it is not possible to change the wash cycle. Accidental interruptions If the door is opened during the wash cycle, the text CLOSE THE DOOR appears on the display. If there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or the electricity supply restored. 9 Wash cycles EN The number and type of wash cycles and options may vary depending on the dishwasher model. When using multi-functional tablets, press the MULTIFUNCTIONAL TABLETS button; the corresponding symbol will light up. If the button is pressed again, the option will be deselected. The “Multi-functional tablets” option results in a longer wash cycle. The use of tablets is only recommended for models having this option and it is not recommended with wash cycles which do not specify the use of multi-functional tablets. Multi-functional tablets* (Tabs) EN Wash options* The OPTIONS may only be set, changed or reset after the wash cycle has been selected and before the Start/ Pause button has been pressed. Only the options which are compatible with the type of wash cycle set may be selected. If an option is not compatible with the selected wash cycle (see Table of wash cycles), the corresponding symbol flashes rapidly 3 times. If an option is selected which is not compatible with another (previously selected) option, it will flash 3 times and switch off, while the most recently selected option will remain active. To deselect an option which has been set by mistake, press the corresponding button again. Zone Wash This option makes it possible to carry out the wash cycle in the selected rack only. Select the wash cycle and then press the ZONE WASH button: the selected rack lights up and the wash cycle starts in the selected rack only. [. . . ] ) The dishes and glasses are covered • The level of refined salt is low or the dosage setting is not suitable for the hardness of the water (see Rinse aid and salt. ) in a white film or limescale deposits. € The lid on the salt dispenser is not closed properly. € The rinse aid has been used up or the dosage is too low. [. . . ]