User manual HOTPOINT LFF 8M116 C EX

[. . . ] Operating instructions DISHWASHER FR Français, 16 EN English, 1 AR 31 ،‫العربية‬ Contents Product Fiche, 2 Precautions, advice and Assistance, 3-4 General safety Disposal Saving energy and respecting the environment Assistance EN FA 45 ،‫فارسی‬ Installation, 5-6 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Description of the appliance, 7 LFF 8M116 Overall view Control panel Loading the racks, 8-9 Lower rack Cutlery basket Upper rack Start-up and use, 10 Starting the dishwasher Measuring out the detergent Wash cycles, 11 Table of wash cycles Special wash cycles and Options, 12 Rinse aid and refined salt, 13 Measuring out the rinse aid Measuring out the refined salt Care and maintenance, 14 Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods Troubleshooting, 15 1 Product fiche EN Product Fiche Brand Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) Energy consumption per year in kWh (2) Energy consumption of the standard cleaning cycle in kWh Power consumption of the off-mode in W Power consumption of the left-on mode in W Water consumption per year in litres (3) Drying efficacy class on a scale from G (low efficacy) to A (high efficacy) Programme time for standard cleaning cycle in minutes The duration of the left-on mode in minutes Noise in dB(A) Re 1pW Built-in model ARISTON LFF 8M116 14 A+ 293. 0 A 190 10 46 No NOTES 1) The information on the label and fiche relates to the standard cleaning cycle, this programme is suitable to clean normally soiled tableware and it is the most efficient programme in terms of combined energy and water consumption. The standard cleaning cycle corresponds to the Eco cycle. 2) Based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. [. . . ] If all-in-one detergents are used, we recommend using the TABS option, because it adjusts the cycle so that the best washing and drying results are always achieved. Only use detergent which has been specifically designed for dishwashers. Using excessive detergent may result in foam residue remaining in the machine after the cycle has ended. The use of tablets is only recommended for models which offer the MULTI-FUNCTIONAL TABLETS option. To achieve the best results from each washing and drying cycle, powder detergent, liquid rinse aid and salt should be used. Adding extra crockery Press the Start/Pause button and open the door, taking care to avoid the escaping steam, and place the crockery inside the dishwasher. Press the Start/Pause button: The cycle will start again after a long beep has been emitted. If the delayed start has been set, at the end of the countdown the wash cycle will not start. Press the Start/Pause button to pause the machine; the wash cycle is stopped. At this stage it is not possible to change the wash cycle. Accidental interruptions If the door is opened during the wash cycle or there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or the electricity supply is restored. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Wash cycle Eco Auto Intensive Auto Normal Auto Fast Duo Wash Delicate Express 30’ Soak Wash cycle which include drying Yes Yes Yes No Yes Yes No No Options Delayed start – Tabs – Extra Dry – Delayed start – Tabs – Extra Dry – Short Time – Zone wash Delayed start – Tabs – Extra Dry – Short Time – Zone wash Delayed start – Tabs Delayed start – Tabs – Extra Dry – Short Time Delayed start – Tabs – Extra Dry Delayed start – Tabs Delayed start EN Approximate duration of wash cycles 03:10’ 02:00’ - 03:10’ 01:30’ - 02:30’ 00:40’ - 01:20’ 02:00’ 01:40’ 00:30’ 00:12’ Water consumption (l/cycle) 11 14, 0 - 15, 5 14, 5 - 16, 0 13, 0 - 14, 5 18, 0 11, 0 9, 0 4, 5 Energy consumption (KWh/cycle) 1, 03 1, 55 - 1, 85 1, 25 - 1, 40 1, 20 - 1, 30 1, 35 1, 15 0, 55 0, 01 Instructions on wash-cycle selection and detergent dosage 1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery. Wash spread over the two/three* racks: normal in the upper rack and third* rack for cutlery and glasses, heavy-duty in saucepans in the lower rack. Cycle for delicate items, which are more sensitive to high temperatures 35 gr/ml – 1 Tab 7. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab 8. Pre-wash while awaiting completion of the load with the dishes from the next meal. 11 Special wash cycles and Options EN Notes: Optimum performance levels when using the “Fast wash” and “Express 30’” cycles can be achieved by respecting the specified number of place settings. [. . . ] € The level of refined salt is low or the dosage setting is not suited to the hardness of the water (see Rinse aid and salt). € The lid on the salt dispenser is not closed properly. € The rinse aid has been used up or the dosage is too low. Has been used up or the dosage is too low (see Rinse aid dispenser setting is not suitable. [. . . ]