User manual HOTPOINT LLD 8S111 X EU

[. . . ] Operating instructions DISHWASHER EN English, 1 FR Français, 16 PL Polski, 31 Contents Product Fiche, 2 Precautions, advice and Assistance, 3-4 General safety Disposal Saving energy and respecting the environment Assistance EN RU Русский, 45 KZ Қаз ақша, 60 Installation, 5-6 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Switching the appliance on for the first time Technical data Description of the appliance, 7 Overall view Control panel LLD 8S111 Loading the racks, 8-9 Lower rack Upper rack Third rack* Adjusting the height of the upper rack Start-up and use, 10 Starting the dishwasher Measuring out the detergent Wash cycles, 11 Table of wash cycles Special wash cycles and Options, 12 Rinse aid and refined salt, 13 Measuring out the rinse aid Measuring out the refined salt Care and maintenance, 14 Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods Troubleshooting, 15 1 Product Fiche EN Product Fiche Brand Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) Energy consumption per year in kWh (2) Energy consumption of the standard cleaning cycle in kWh Power consumption of the off-mode in W Power consumption of the left-on mode in W Water consumption per year in litres (3) Drying efficacy class on a scale from G (low efficacy) to A (high efficacy) Programme time for standard cleaning cycle in minutes The duration of the left-on mode in minutes Noise in dB(A) Re 1pW Built-in model HOTPOINT ARISTON LLD 8S111 15 A+ 304. 0 A 195’ 10 42 Yes NOTES 1) The information on the label and fiche relates to the standard cleaning cycle, this programme is suitable to clean normally soiled tableware and it is the most efficient programme in terms of combined energy and water consumption. The standard cleaning cycle corresponds to the Eco cycle. 2) Based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. [. . . ] Compartment B comprises a level showing the maximum quantity of liquid or powder detergent that can be added to each cycle. Remove detergent residues from the edges of the dispenser and close the cover until it clicks. Close the lid of the detergent dispenser by pulling it up until the closing device is secured in place. The detergent dispenser automatically opens up at the right time according to the wash cycle. If all-in-one detergents are used, we recommend using the TABS option, because it adjusts the cycle so that the best washing and drying results are always achieved. Only use detergent which has been specifically designed for dishwashers. Using excessive detergent may result in foam residue remaining in the machine after the cycle has ended. The use of tablets is only recommended for models which offer the MULTI-FUNCTIONAL TABLETS option. To achieve the best results from each washing and drying cycle, powder detergent, liquid rinse aid and salt should be used. Changing a wash cycle in progress If a mistake was made during the wash cycle selection process, it is possible to change the cycle, provided that it has only just begun. To change the wash cycle, switch off the machine by pressing and holding down ON/OFF/Reset; the text 3-2-1 OFF will appear on the display. Switch the machine back on using ON/ OFF; and select the wash cycle and any desired options again. Adding extra crockery Press Start/Pause: the Pause symbol lights up. Open the door, taking care to avoid the escaping steam, and place the crockery inside the appliance. Press Start/Pause again: the Start symbol lights up and the cycle is resumed. Press Start/Pause to pause the machine; the wash cycle is stopped temporarily. At this stage the wash cycle cannot be changed. Accidental interruptions If the door is opened during the wash cycle or there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or the electricity supply restored. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Soak Wash cycle which include drying Yes Yes Yes No Yes Yes No No Options Delayed start – Tabs – Extra Dry Delayed start – Tabs – Extra Dry – Short Time – Zone wash Delayed start – Tabs – Extra Dry – Short Time – Zone wash Delayed start – Tabs Delayed start – Tabs – Extra Dry – Short Time Delayed start – Tabs – Extra Dry Delayed start – Tabs Delayed start EN Approximate duration of wash cycles 03:15’ 02:00’ - 03:10’ 01:30’ - 02:30’ 00:40’ - 01:20’ 02:00’ 01:40’ 00:30’ 00:12’ Water consumption (l/cycle) 11 15, 5 - 17, 0 15, 0 – 16, 5 13, 0 - 14, 5 18, 0 11, 5 9, 0 4, 5 Energy consumption (KWh/cycle) 1, 07 1, 55 - 1, 80 1, 25 - 1, 40 1, 20 - 1, 30 1, 35 1, 15 0, 55 0, 01 Instructions on wash-cycle selection and detergent dosage 1. [. . . ] € The level of the refined salt is low or the dosage setting is not suited to the hardness of the water (see Rinse aid and salt). € The lid on the salt dispenser is not closed properly. € The rinse aid has been used up or the dosage is too low. • The rinse aid dosage is too high. [. . . ]