User manual HOTPOINT LTF 11H121 EU

[. . . ] Operating instructions DISHWASHER NL Nederland, 15 EN English, 1 Contents Precautions, advice and Assistance, 2-3 General safety Disposal Saving energy and respecting the environment Assistance EN Installation, 4-5 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Ecodesign Regulation Description of the appliance, 6 Overall view Control panel LTF 11H121 Loading the racks, 7-8 Lower rack Cutlery basket Upper rack Cutlery tray Adjusting upper rack Start-up and use, 9 Starting the dishwasher Measuring out the detergent Wash cycles, 10 Table of wash cycles Special wash cycles and Options, 11 Rinse aid and refined salt, 12 Measuring out the rinse aid Measuring out the refined salt Care and maintenance, 13 Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods Troubleshooting, 14 1 Precautions, advice and Assistance EN This appliance was designed and manufactured in compliance with international safety standards The following information has been provided for safety reasons and should therefore be read carefully. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine. Please read these instructions carefully: they contain important information on installation, use and safety. [. . . ] Using excessive detergent may result in foam residue remaining in the machine after the cycle has ended. The use of tablets is only recommended for models which offer the MULTI-FUNCTIONAL TABLETS option. To achieve the best results from each washing and drying cycle, powder detergent, liquid rinse aid and salt should be used. Modifying a wash cycle in progress If a mistake was made during the wash cycle selection process, it is possible to change the cycle, provided that it has only just begun: open the door taking care to avoid the escaping steam, by pressing and holding the ON/OFF button, the machine will switch off. Switch the machine back on using the ON/OFF button and select the new wash cycle and any options desired; start the cycle by closing the door. Shut the door and the cycle will begin from the point at which it was interrupted. Accidental interruptions If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or the electricity supply is restored. 9 Wash cycles EN The number and type of wash cycles and options may vary depending on the dishwasher model. Instructions on wash-cycle selection and detergent dosage Environmentally-friendly wash cycle with low energy consumption levels, suitable for pans and dishes. 25 gr/ml – 1 Tab Wash spread over the three* racks: normal in the upper rack and third* rack for cutlery and glasses, heavy-duty in saucepans in the lower rack. 35 gr/ml – 1 Tab Economical and fast wash for delicate items which are sensitive to high temperatures - run immediately after use (glassware in the upper rack + fragile plates in the lower rack). 35 gr/ml – 1 Tab Economical and fast wash to be used for lightly soiled dishes - run immediately after use (2 plates + 2 glasses + 4 pieces of cutlery + 1 saucepan + 1 small frying pan). 25 gr/ml – 1 Tab This guarantees optimal performance , reduced consumption levels and silent operation. It is ideal for night-time operation of the appliance. 35 gr/ml – 1 Tab Pre-wash for dishes while awaiting completion of the load with the dishes from the next meal. No detergent Disinfecting wash cycle suitable for washing bottles, rings and teats together with plates, cups, glasses and cutlery. The crockery should only be loaded on the upper rack. 30 gr/ml - 1 Tab Disinfecting cycle for cleaning the inside of the dishwasher, to be carried out only when the dishwasher is EMPTY using specific detergents designed for dishwasher maintenance. Eco* Wash cycles with drying Yes Options Delayed start – Tabs – Extra Dry Delayed start – Tabs – Extra Dry Zone wash - Short Time Delayed start – Tabs – Extra Dry – Zone wash - Short Time Approximate duration of wash cycles 3:10’ 2. 10 Special wash cycles and Options Notes: Optimum performance levels when using the “Fast" and "Express 30’” cycles can be achieved by respecting the specified number of place settings. * The Eco wash cycle complies with regulation EN-50242. [. . . ] €¢  he level of the refined salt is low or the dosage setting is not suited to the hardness of the T water (see Rinse aid and salt). €¢ The lid on the salt dispenser is not closed properly. €¢ The rinse aid has been used up or the dosage is too low. • The rinse aid dosage is too high. [. . . ]