User manual HOTPOINT MFAA 1

[. . . ] Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] u Always see to good ventilation at the installation site. 4. 3 Changing over the door hinges You can change over the door hinges if necessary. NOTICE Risk of damage to side-by-side appliances due to condensation!When a side-by-side appliance (S. . . ) is fitted together with a second appliance (as a SBS combination), the door hinges must remain as delivered. Ensure that the following tools are to hand: q Torx® 25 q Torx® 15 q Screwdriver q Cordless screwdriver, if necessary q Second person for fitting work, if needed u Lift out the bearing pin Fig. 5 (28) , transfer it to the opposite location hole of the turn hinge and screw it firmly into place. u Carefully lift off the cover on the handle side Fig. 5 (27) and transfer it to the opposite side. 5 (25) firmly into place on the new hinge side, possibly using a cordless screwdriver (with 4 Nm). 5 (22) together with the washer and adjustable-height foot. In so doing, pay attention that the locating lug points backwards Fig. 5 4. 3. 1 Detaching the door Note u Remove any food from the door racks before removing the door, so that no food falls out. 4. 3. 3 Transferring the handle u Transfer the spring clamp Fig. The LED of the next lower temperature range then shines in the temperature display. WARNING Fire and overheating hazard!u Do not use extension cables or multiple socket outlets. The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see Appliance at a glance). Connect the appliance only with a properly installed socket outlet with earthing contact. The socket outlet must be fused with 10 A or higher. It must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. u Plug in the power plug. 4. 7 Switching on the appliance u Press On/Off button Fig. The temperature display indicates the set temperature. 5 Control 5. 1 Door alarm If the door is open longer then 60 s, the audible alarm sounds. The audible alarm is automatically silenced when the door is closed. 5. 2. 3 SuperCool With SuperCool you switch to the highest cooling performance to reach lower cooling temperatures. Use SuperCool, to rapidly cool large amounts of food. The SuperCool function uses slightly more energy. [. . . ] Although the running time is increased as a result, energy is saved. u This is normal in energy-saving models. 10 Decommissioning food. The inverter regularly flashes every 15 seconds*. The inverter is equipped with a diagnostic LED. [. . . ]