User manual HOTPOINT ONS 537 I RFH

[. . . ] Operating Instructions OVEN Contents Installation, 2-3 GB English, 1 GB RS Русский, 11 KZ Positioning Electrical connections Data plate Description of the appliance, 4 Overall view Control panel Start-up and use, 5 Starting the oven The electronic cooking programmer, 6 Cooking modes, 7-8 MOS 538 J X RU/HA MOSS 537 J X RU/HA Cooking modes Practical cooking advice Cooking advice table Precautions and tips, 9 General safety Disposal Respecting and conserving the environment Assistance Maintenance and care, 10 Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Installation !Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. [. . . ] And Programming has been set when the buttons are illuminated. The DISPLAY shows the cooking end time and the cooking duration alternately. Cancelling a programme To cancel a programme: button until the icon corresponding to • press the the setting you wish to cancel and the digits on the display are no longer flashing. Press the “-” button until the digits 00:00 appear on the display. € Press and hold the “+” and “-” buttons; this will cancel all the settings selected previously, including timer settings. iNCREASE TIME button Setting the clock !The clock may be set when the oven is switched off or when it is switched on, provided that a the end time of a cooking cycle has not been programmed previously. After the appliance has been connected to the icon and the four mains, or after a blackout, the numerical digits on the DISPLAY will begin to flash. Press the icon and the four digits on the display begin to flash. Use the “+” and “-” buttons to adjust the time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value. Wait for 10 seconds or press the to finalise the setting. This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed. Press the icon and the three digits on the display begin to flash. Use the “+” and “-” buttons to set the desired time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value. Wait for 10 seconds or press the to finalise the setting. The display will then show the time as it counts down. When this period of time has elapsed the buzzer will be activated. A temperature value can be set for all cooking modes between 60°C and Max, except for • GRILL (recommended: set only to MAX power level); • GRATIN (recommended: do not exceed 200°C). Do not place racks in position 1 and 5 during fanassisted cooking. In the GRILL and GRATIN cooking modes, place the dripping pan in position 1 to collect cooking residues (fat and/or grease). MULTI-COOKING • Use position 2 and 4, placing the food that requires more heat on 2. € Place the dripping pan on the bottom and the rack on top. [. . . ] assistance Communicating: • appliance model (Mod. ) • serial number (S/N) This information is found on the data plate located on the appliance and/or on the packaging. 9 Maintenance and care Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Inspecting the seals Check the door seals around the oven periodically. [. . . ]