User manual HOTPOINT RC 641 DBRFH

[. . . ] Operating Instructions HOB Contents GB English, 1 GB RS Русский, 14 Installation, 2-4 Positioning Electrical connection Description of the appliance, 5-6 Control panel Extendable cooking zones Start-up and use, 7-10 Switching on the hob Switching on the cooking zones Switching off the cooking zones Power function Heating elements Programming the cooking duration Timer Control panel lock Switching off the hob “Demo” mode Practical advice on using the appliance Safety devices Practical cooking advice 7HKRC 640 B RU/HA 7HKRC 640 X RU/HA 7HKRC 641 D X RU/HA 7HKEC 645 D X RU/HA 7HKRC 631 T RU/HA 7HKRC 641 D B RU/HA CRC 640 X RU/HA CRC 641 DB RU/HA CRC 631 TX RU/HA Precautions and tips, 11 General safety Disposal Care and maintenance, 12 Switching the appliance off Cleaning the appliance Disassembling the hob Technical description of the models, 13 Installation !Before operating your new appliance please read GB this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance. Please keep these operating instructions for future reference. [. . . ] Adjust the power level of the cooking zone. The indicator light corresponding to the selected zone will start flashing. Set the cooking duration using the buttons. Confirm by pressing the button or automatic selection occurs after 10 seconds. The timer begins counting down immediately. €Demo” mode It is possible to set the hob to a demonstration mode where all the controls work normally but the heating elements do not switch on. To activate the “demo” mode the hob must be switched on, with all the hotplates switched off. At step 2, press the - button: the simultaneously for 6 seconds. When the 6 seconds have elapsed, the ON/OFF and CONTROLS LOCKED indicator lights will flash for one second. Release the press the button; duration decreases progressively until it reaches 0 and switches off. The programme resets and the display exits programming mode. + and buttons and Timer The hob must be switched on. The timer can be used to set a duration up to 99 minutes. Press the programming button until the timer . € The display will show the text DE and MO and the hob will be switched off. € When the hob is switched on again it will be set to the “demo” mode. To exit this mode, follow the procedure described above. The display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally. confirm by pressing the - + and buttons. Practical advice on using the appliance To obtain the best results from your hob: • Use pans with a thick, flat base in order to fully utilise the cooking zone. The timer begins counting down immediately. [. . . ] Stainless steel frame (only in models with outer frame) Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. After cleaning, it is advisable to rinse the surface well and dry it thoroughly. If water is spilt on the surface, dry it quickly and thoroughly. Some hobs have an aluminium frame which is similar to stainless steel. [. . . ]