User manual HOTPOINT SDS 1721

[. . . ] You should connect the WinTV-CI to your computer using the supplied USB2 cable. You should also make sure your Hauppauge TV Card is also connected at this time. The found new hardware wizard will appear again, select Cancel each time it appears. WinTV-NOVA-T, WinTV-NOVA-S, WinTV-HVR-900 or WinTV-HVR-3000 G Windows XP with Service Pack 2 or Windows Vista G One free USB 2. [. . . ] Once the WinTV installation is complete, click OK then Exit in the window "Hauppauge WinTV Installation CD". You should now be back at your Windows desktop. To check that you have correctly installed you WinTV-CI, you can check in Device Manager. When you run WinTV for the first time, a message will appear asking you to scan for tuner channels now. Channel up Channel down Channel surf Last channel Freeze picture Click your right mouse button in the TV window to remove toolbars. Click the Pref button to open the preferences menu: View: These are the settings for the On Screen Display of the TV channel and Audio Volume, where you can enable Close Captions (if supported in your system configuration), plus controls for the Toolbar mode (Title mode), NoToolbar mode (No Title) and Full Screen (TV mode). Movies: Here is where you configure some video and audio settings. You can set the movie record directory (DVCR Record File Path). Snapshot: Set the size of your captured images, plus single or two field captures for capturing motion or still image video. Current TV channel Click your right mouse button here to see the channel selector Here is the main control bar for TV channels, and duplicate controls for other functions: Suite-Manager: Configure the TV tuner (scanning, channel pre set, etc. From the scan page perform a channel scan as you would normally with your WinTV device, refer to the full manual or quick installation guide for your WinTV product if you need assistance with this. Please re-insert your CAM and try again" Please check your CAM is fully inserted into the WinTV-CI. Try reinserting your CAM, if the problem persists, please unplug/replug your WinTV-CI USB cable and retry. I see the message "Please insert your smart card" Check your smartcard is correctly inserted into your CAM, check it is inserted the correct way up. the metal contact of the Smart Card should generally be face up. (If you are in doubt, please check your CAM's User Guide). I just received my new CAM and Card from my Pay-TV provider and have plugged them into the WinTV-CI correctly but I am unable to see any Pay-TV. most Pay-TV providers will require the Card to be activated before it will function. You should contact your Pay-TV provider to ensure your card is activated and able to decrypt Pay-TV. In order to perform some operations in your CAM such as Setting the Parental Controls, changing your PIN Number or checking your subscription status you can access these functions from within the WinTV-CI CAM Menu Application. when WinTV is open an icon will appear in the taskbar. To open the WinTV-CI CAM Menu Application you can either double left click on the icon or single right click and choose "Open". [. . . ] Radio Interference Statement: WinTV have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]