User manual HOTPOINT SG C11 CKG

[. . . ] En GENERAL SAFETY INSTRUCTIONS • If the plug, power cord or appliance appear to be damaged or if any visible damage or water leaks are found, do not operate the iron. In such cases have it checked by Hotpoint-Ariston’s authorised staff in order to 6 avoid any hazardous situation. €¢ If the appliance was dropped, do not operate it. €¢ This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. [. . . ] To start the Eco function set the ON/OFF knob (16) to . This function automatically switches off the steam generator when it is not used for a few minutes. In particular, your steam generator will automatically switch off after 10 minutes if it is left unused. If you leave the steam generator unattended, a buzzer will sound to inform you that the automatic switch-off function is active. to restart it , just press the ON/OFF button. Wait for the Steam Ready indicator light to turn on again and for the temperature indicator light to turn off before start ironing again. Make sure that the water level in the reservoir is higher than 1/4. Select the recommended ironing temperatura by using the temperature selector (19) (see step B, chapter “Temperature selection”) 4. Press the steam button (14) to use the steam ironing function. We recommend using the steam button function when the temperature is higher than. Wait for the temperature indicator light to turn off and for the Steam Ready indicator light to turn on, before pressing the steam button. Ironing with continuous steam (E) The continuous steam function is useful to iron out any persistent wrinkles through a uniform emission of steam onto the fabrics. Make sure that the water level in the reservoir is higher than 1/4. Select the recommended ironing temperature using the temperature control (19) - see step B, chapter “Temperature selection”. Press the continuous steam button (13) and activate the slider on the button in order to get a continuous steam flow when ironing. We recommend using the continuous steam button when the temperature is higher than . Wait for the temperature indicator light to turn off and for the Steam Ready indicator light to turn on, before pressing the steam button. Disconnect the appliance plug from the electrical socket and let the steam generator cool down. Wind the steam cable (11) and the power-supply cord (10) around the special cord-rewinding clip (9). Store the steam generator in a safe dry place. Let the steam generator cool down and store it in a safe dry place. Cleaning (J) FEATURES Vertical steam function (F) The vertical steam function is useful to iron out wrinkles from hanging garments, curtains etc. [. . . ] In case of very hard water, we recommend mixing it proportionally with demineralised water - see chapter "Filling the water reservoir". You can use starch directly on the reverse side of the fabrics and in any case never in the water reservoir. The garment was not washed correctly or it has some soap residues. You are ironing a new garment not yet washed for the first time. [. . . ]