User manual HOTPOINT SL B10 BPB

[. . . ] trolley Power is designed combining efficiency and ergonomy. They new high efficiency motors ensure optimal performances with low consumption. The exclusive Trolley Sysyem, with patent pending, combined with the usage of the Remote Power control (if available) ensures the maximal ergonomy and maneuverability around furniture. This appliance was developed for household use only and should not be put to industrial use. [. . . ] Do not use the vacuum cleaner without filters, Pure Clean dust bag, dust bag support or dust container, as the appliance could get damaged. Unwind the power cord (34) and plug the appliance into an electrical outlet (220/240V). Do not start the vacuum cleaner if the plastic flexible hose is entangled, as this could damage the appliance. FEATURES Electronic power regulator (B) The electronic power regulator (26) (if available) allows to set the suction power required. On some models, the ideal power levels are indicated, according to the surface to be cleaned: awnings, carpets and hard floors. The Eco function (if available) allows to save 25% energy, compared with the consumption relative to max suction power, ensuring at the same time cleaning efficacy. We advise you to unwind the entire power cord (yellow marker: 6, 5m; red marker: 7m) to avoid any overheating and damage. Press the start/stop button (19) to start the appliance. Press the Trolley System opening/closing button (13) to extend the carrying handle (12) to the desired length until it locks into place. Then manoeuvre the vacuum cleaner using the carrying handle when cleaning the house. To select the desired suction intensity (based on the model) use the +/- button and electronically adjust the power (21) of Remote Power Control (C) The Remote power control (if available) enables you to adjust the suction power directly and effortlessly from the hand grip, with no need to bend. Slide a new Pure Clean dust bag into the dust bag support completely; then place it back into the special compartment. Close the dust compartment lid until it clicks into place. Start & Pause (E) The Start & Pause function (if available) allows you to keep the vacuum cleaner on stand-by and lock the cleaning head in the park position: just insert the brush into its horizontal housing (30). Air Fresh Hepa 13 (H) The Air Fresh Hepa 13 filter (32) (if available), with active carbons treatment, ensures the maximal dust retention (>99, 95%) and the filtration of odours. CLEANING AND MAINTENANCE Before cleaning or maintaining the vacuum cleaner, make sure it has been unplugged from the electrical outlet. Do not use aggressive substances or abrasive materials to clean the appliance, its internal parts and attachments. Make sure it is thoroughly dry before using again. Make sure all its parts are thoroughly dry before replacing them. We advise you to clean the filter at least every 4 months to restore its filtering power. In any case we recommend replacing the filter at least every year to ensure maximum performance. Cleaning the appliance Use a dry or slightly damp soft cloth to clean the plastic parts (body, dust compartment, flexible hose etc) and the metal extension pipe (9). [. . . ] Clean the dust container in models without dust bag. Clean the filters and, if needed, replace them. Make sure the expansion pipe, flexible hose and brush are not blocked. Clean the filters and, if needed, replace them. [. . . ]