User manual HOTPOINT SL C10 BCH

[. . . ] INTRODUCTION Thank you for purchasing our Trolley Power vacuum cleaner. In doing so you have opted for an effective, high performance appliance. We advise you to register this product on www. Uk to make sure you are entitled to all the benefits made available by Hotpoint Customer Service. [. . . ] Having completed your cleaning, press the opening/closing button on the Trolley System and close the carrying handle until it locks into place. Use the Trolley System's carrying handle to store the appliance, making sure you have correctly locked it into place. Trolley System (D) The Start & Pause function (if available) allows you to keep the vacuum cleaner on stand-by and lock the cleaning head in the park position: just insert the brush into its horizontal housing (30). Start & Pause (E) 17 en it The Trolley Dual Clean (if available) version of the Trolley Power makes your use of the appliance extremely versatile because it can be used with or without dust bag. Just assemble the conversion kit in the package: it comprises a Pure Clean dust bag (36), dust bag support (35), gasket (39), and motor filter grill (38) already fitted to the motor filter (37). The assembling takes place as follows: 1. Make sure the appliance is disconnected from the electrical outlet. Press the dust-compartment opening button (14) to open the dust compartment lid (15) and remove the dust container (41). Fit the gasket into the special groove along the perimeter of the dust compartment (40). Fit the motor filter grill (already fitted to the motor filter) into the special dust-compartment guides. Slide the Pure Clean dust bag into the dust bag support all the way; then place it into the special dust compartment. Make sure all its parts are thoroughly dry before replacing them. We advise you to clean the filter at least every 4 months to restore its filtering power. In any case we recommend replacing the filter at least every year to ensure maximum performance. Use a dry or slightly damp soft cloth to clean the plastic parts (body, dust compartment, flexible hose etc) and the metal extension pipe (9). Cleaning the appliance If you are finding it difficult to close the dust compartment lid, it is likely that the Pure Clean dust bag and/or its dust bag support have not been assembled correctly. Do not force the dust bag lid to close, make sure both parts are in 18 en it the correct position to allow lid closure. Cleaning the filters (I) version with dust bag The Pure Clean Hepa 13 filter ensures maximum protection against allergens and maintains high air quality, as the air given back by the appliance is entirely free from dust/ powder residues (filtering power > 99. Disassemble the air grill (33) using the opening tab. Remove the Pure Clean Hepa 13 filter by releasing the opening tab. Wash the filter under running water, taking care that the jet of water is not too strong. Hold it so that the water flows parallel to its folds. [. . . ] Make sure the expansion pipe, flexible hose and brush are not blocked. Clean the filters and, if needed, replace them. Make sure the expansion pipe, flexible hose and brush are not blocked. If large quantities of very fine dust/powder are sucked up (e. [. . . ]