User manual HOTPOINT SL C22 AA0

[. . . ] We advise you to register this product on www. Uk to make sure you are entitled to all the benefits made available by Hotpoint Customer Service. the Trolley Power was designed to ensure optimum performance and consistent usability. The exclusive Trolley System ensures maximum manouverability and helps you move freely around the house without knocking against the furniture. [. . . ] Container correctly and close the dust compartment lid until it clicks into place. The appliance is equipped with a safety device that prevents the dust compartment lid from closing unless the dust bag / container has been correctly installed. The appliance is equipped with a safety device that prevents the dust compartment lid from closing unless the dust bag / container has been correctly installed. Close the dust compartment lid until it clicks into place. Replacing the Pure Clean dust bag (G) We recommend always using Hotpoint original Pure Clean dust bags, because their special fabric allows optimum air filtration, maximum dust/powder retention, high performances and a long motor life. As the Pure Clean dust bags (34) are made of fabric, they are more resistant than conventional paper bags and can retain very fine dust/powder particles more effectively, thus ensuring maximum hygiene. We recommend replacing the Pure Clean bag as soon as the full-bag indicator illuminates. Change at least once a year to be always sure of the hygienic condition of your vacuum cleaner. The pores of a bag clogged with dust/powder particles reduce the motor's suction power and can cause damage. Make sure the appliance is disconnected from the electrical outlet. Press the dust-compartment opening button (13) to open the dust compartment lid (14). Remove the Pure Clean Hepa 13 filter by releasing the opening tab. Wash the filter under running water, taking care that the jet of water is not too strong. Hold it so that the water flows parallel to its folds. Let it dry at room temperature until all its parts are thoroughly dry. Replace the Pure Clean Hepa 13 filter, paying attention to the position of the notches. Fit the air grill into its housing until it clicks into place. to clean the dust compartment filters (38): 8. Press the dust-compartment opening button (13) to open the dust compartment lid (14). Remove the Pure Clean dust bag (34), motor filter grill (36) and motor filter (35) from the motor filter grill. Clean the motor filter by washing it under running water, taking care that the jet of water is not too strong. When cleaning the motor filter grill, remove any dust/powder residues with a small brush. [. . . ] Clean the dust container in models without dust bag. Clean the filters and, if needed, replace them. Make sure the expansion pipe, flexible hose and brush are not blocked. Clean the filters and, if needed, replace them. [. . . ]