User manual HOTPOINT TCM 580 B P

[. . . ] Instruction manual TUMBLE DRYER EN English, 1 Contents Installation, 2 BS Bosnian, 25 Where to install the tumble dryer Ventilation Electrical connections Preliminary information EN SR Српски, 13 Warnings, 4 General safety Save energy and respect the environment Care and maintenance, 6 Disconnecting the power supply Cleaning the filter after each cycle Checking the drum after each cycle Emptying the water container after each cycle Cleaning the condenser unit Cleaning the tumble dryer Description of the tumble dryer, 8 TCM 580 Features Control panel How to carry out a drying cycle, 9 Starting a drying programme Drying settings, 10 Drying times Drying programmes and options Laundry, 11 Sorting laundry Care labels Special items www. Troubleshooting, 11 Assistance, 12 Spare parts Essential Contact Informaion Information on recycling and disposal This symbol reminds you to read this instruction manual. Keep this manual at hand for immediate reference whenever necessary. Always store this manual close to the tumble dryer and remember to pass it on to any new owners when selling or transferring the appliance, so they may familiarise with the warnings and suggestions herein contained. [. . . ] EN 5 Care and maintenance EN Disconnecting the power supply Cleaning the filter after each cycle !Disconnect the dryer when not in use or during cleaning and maintenance operations. Emptying the water container after each cycle 2 The filter is a fundamental component of the dryer: its function is to collect lint and fluff that form during drying. Clean the filter once drying is completed, by rinsing it under running water or cleaning it with a vacuum cleaner. Should the filter become clogged, the flow of air inside the dryer will be seriously hampered: drying times becomes loger and more energy is consumed. The filter is located in front of the dryer seal (see Picture). Clean the fluff off the filter and replace it correctly. Do not use the dryer unless the filter has been replaced in its holder. Have the dryer checked regularly by authorised technical personnel in order to ensure that the electrical and mechanical parts work safely (see Assistance). Remember to clean your filter and Condenser unit after each load. Remember to empty your water container after each load. Doing this will keep your machine working at its BEST!EN 2 Water container Filter Tap Rear Condenser Unit Air intake Catches Handle Condenser unit Condenser cover Front 7 Description of the tumble dryer Opening the door EN Features Rating plate Press the door Water container Filter Model & Serial Numbers Air intake grille Condenser unit (cover open) Condenser cover handle (pull to open) Control panel Empty water Light TIMER Knob Indicator 0 HIGH HEAT Button START Button Drying time selector knob This is used to set the drying time: turn the knob in a clockwise direction until the indicator is set to the desired drying time. The 0 position switches off the dryer (see Drying settings). Do not attempt to turn the knob anticlockwise. High Heat button It can be used to customise the selected programme in accordance with your own requirements. sTART button Press the button to begin drying. Empty water container indicator light The “Empty water container” indicator light signals that the water container must be emptied. If the container becomes full during the programme, the dry cycle will stop and clothes will stay wet. In order to avoid this procedure, always empty the water container after using the tumble dryer (see Care and maintenance). 8 How to carry out a drying cycle Starting a drying programme 1. Plug the dryer into the power supply socket. [. . . ] - The appliance has been used for normal domestic purposes only. - The appliance has not been altered, serviced, maintained, dismantled, or otherwise interfered with by any person not authorised by us. - Any repair work must be undertaken by us or our appointed agent. - Any parts removed during repair work or any appliance that is replaced become our property. [. . . ]