User manual HOTPOINT UPS 1521

[. . . ] Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the room in which the appliance is installed is too small, a flammable gas-air mixture may form in the event of a leakage in the refrigeration circuit. The quantity of refrigerant used in your appliance is indicated on the type plate on the inside of the appliance. u Detach the connecting cable from the rear of the appliance, removing the cable holder at the same time because otherwise there will be vibratory noise!u Dispose of packaging material (see 4. 5) . 4 Putting into operation u Align the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjustableheight feet (A) and using a spirit level. 4. 4 Insertion into a row of kitchen units Note u Clean the appliance (see 6. 2) . If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance. u Always see to good ventilation at the installation site. 4. 3 Changing over the door hinge You can change over the door hinges if necessary. q Torx® 25 q Torx® 15 q Supplied open-ended wrench q If necessary, a second person to assist with installation CAUTION Risk of injury if the door tips!u Set down the door carefully. Make sure that the following tools are at hand: (1) Stack cabinet (3) Kitchen cabinet (2) Appliance (4) Wall The appliance can be inserted into a row of kitchen units. 5 (2) to the height of the row of units, a suitable stack cabinet Fig. 5 (1) can be fitted above the appliance. When inserting the appliance into a row of kitchen units (max. depth 580 mm), the appliance can be installed directly next to the kitchen unit Fig. If the alarm status persists: (see Malfunction). u Use the adjustment button, Fig. 3 (2), to set the desired value from h 0 to h 5. u Deactivate the setting mode by pressing the On/Off button, Fig. w The temperature display shows the temperature again. 5. 4. 1 Muting the temperature alarm The audible alarm can be muted. When the temperature is sufficiently cold again, the alarm function is active again. w The audible alarm is silenced. 5. 2 Child proofing The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children. 5. 5 Freezing food The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see Appliance at a glance) under "Freezing capacity . . . The maximum load of frozen food for the drawers is 25 kg each and for the shelves 35 kg each. 5. 2. 1 Setting the child lock To switch on the function: u Activate setting mode by pressing the SuperFrost button, Fig. w The Menu symbol is shown on the display, Fig. u Briefly confirm with the SuperFrost button, Fig. u Briefly confirm with the SuperFrost button, Fig. 3 (4). CAUTION Risk of injury due to broken glass! [. . . ] Speed-controlled* compressors may produce varying running noise due to different speed steps. The noise is produced whenever the refrigeration unit (motor) automatically switches on or off. It is briefly a little louder when the refrigeration unit (the motor) switches on. The refrigeration increases automatically when the SuperFrost, function is activated, fresh food has just been placed in the appliance or the door has been left open for a while. [. . . ]