User manual HOTPOINT WMD 923BX EU

[. . . ] Instructions for use WASHING MACHINE Contents GB English, 1 GB IT Itaiiano, 13 Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the washing machine, 4-5 Control panel Display Running a wash cycle, 6 Wash cycles and functions, 7 Table of wash cycles Wash functions WMD 923 Detergents and laundry, 8 Detergent dispenser drawer Preparing the laundry Special wash cycles Load balancing system Precautions and tips, 9 General safety Disposal Opening the porthole door manually Care and maintenance, 10 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Troubleshooting, 11 Service, 12 1 Installation GB !This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. [. . . ] M My Cycle: allows for any wash cycle to be stored. Ultradelicates Fast spin Resistents (1st press of the button) Rinse Cottons (2nd press of the button) Pump out (3rd press of the button) 60° 40° 30° - 1200 800 0 1200 1200 0 -    - -     - 9 2, 5 1 9 9 9 - The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected. For all Test Institutes: 1) Test wash cycle in compliance with regulation 2010/1061: set wash cycle 60°C (2nd press of the button); set wash cycle 40°C (3rd press of the button). 2) Long wash cycle for cottons: set wash cycle 40°C (3rd press of the button). 3) Short wash cycle for cottons: set wash cycle ; temperature of 40°C (press TEMPERATURE button). 4) Long wash cycle for synthetics: set wash cycle 60°C (1st press of the button); temperature of 40°C (press TEMPERATURE button). Wash functions Timer Saver If you select this option, the wash cycle duration will be reduced by up to 50%, depending on the selected cycle, thereby guaranteeing simultaneous water and energy saving. Use this cycle for lightly soiled garments. Eco Wash The Eco Wash function saves energy by not heating the water used to wash your laundry – an advantage both to the environment and to your energy bill. Instead, intensified wash action and water optimisation ensure great wash results in the same average time of a standard cycle. For the best washing results we recommend the usage of a liquid detergent. It cannot be used with the , (90°C), , , , . It cannot be used with the , “Fastwash 60’”, , , . Easy Iron By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washing machine will perform slow rotations of the drum; the “Easy Iron” and START/ PAUSE indicator lights will flash (orange) and the text “END OF CYCLE” will appear on the display. To end the cycle, press the START/PAUSE button or the “Easy Iron” button. It cannot be used with the , “Fastwash 30’”, “Fast spin Resistents” and “Pump out”. , , 7 Detergents and laundry GB Detergent dispenser drawer Good washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause a build up on the inside of your appliance and contribute to environmental pollution. Special wash cycles Anti Stain : this programme is suitable to heavily-soiled garments with resistant colours. It ensures a washing class that is higher than the standard class (A class). When running the programme, do not mix garments of different colours. [. . . ] • The START/PAUSE button has not been pressed. €¢ The drain hose is not fitted at a height between 65 and 100 cm from the floor (see “Installation”). €¢ The free end of the hose is under water (see “Installation”). €¢ The wall drainage system is not fitted with a breather pipe. [. . . ]