User manual HOTPOINT WMF 722BSC EU

[. . . ] Instructions for use WASHING MACHINE Contents GB English, 1 GB GR ΕΛΛΗΝΙΚΑ, 13 BG БЪЛГАРСКИ, 25 Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the washing machine, 4-5 UK Українська, 37 Control panel Display Running a wash cycle, 6 Wash cycles and options, 7 Table of programmes and wash cycles Wash options Detergents and laundry, 8 Detergent dispenser drawer Preparing the laundry Special wash cycles WMF 722 Precautions and advice, 9 General safety Disposal Opening the porthole door manually Care and maintenance, 10 Cutting off the water and electricity supplies Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Troubleshooting, 11 Service, 12 1 Installation GB !This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. [. . . ] The options may affect the recommended load value and/or the duration of the cycle. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected. For all Test Institutes: 1) Test wash cycle in compliance with regulation 2010/1061: set wash cycle 4 with a temperature of 60°C. 2) Test wash cycle in compliance with regulation 2010/1061: set wash cycle 5 with a temperature of 40°C. 3) Long wash cycle for cottons: set wash cycle 5 with a temperature of 40°C. 4) Long wash cycle for synthetics: set wash cycle 6 with a temperature of 40°C. Wash options Timer Saver If you select this option, the wash cycle duration will be reduced by up to 50%, depending on the selected cycle, thereby guaranteeing simultaneous water and energy saving. Use this cycle for lightly soiled garments. It cannot be used in conjunction with wash cycles 1, 2, 7, 8, 9, 10, 11, 12, 13, 14, , . 7 Detergents and laundry GB Detergent dispenser drawer Successful washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. Do not use hand washing detergents; they create too much foam. B MAX Special wash cycles Anti Stain: the programme 1 is suitable to heavily-soiled garments with resistant colours. It ensures a washing class that is higher than the standard class (A class). When running the programme, do not mix garments of different colours. we recommend the use of powder detergent. Pre-treatment with special additives is recommended if there are obstinate stains. Whites: use this cycle 2 to wash white clothes. The programme is designed to maintain the brightness of white clothes over time. anti allergy: use programme 7 to remove major allergens such as pollen , mites , cat’s and dog’s hair. Baby: use the special wash cycle 8 to remove the remove the soiling typically caused by babies, while removing all traces of detergent from nappies in order to prevent the delicate skin of babies from suffering allergic reactions. The cycle has been designed to reduce the amount of bacteria by using a greater quantity of water and optimising the effect of special disinfecting additives added to the detergent. Wool: is the only washing machine manufacturer to have been awarded the prestigious Woolmark Platinum Care endorsement (M. [. . . ] Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be not solved easily using the following list. gB Problem: The washing machine does not switch on. Possible causes / Solutions: • The appliance is not plugged into the socket fully, or not enough to make contact. The washing machine does not fill • The water inlet hose is not connected to the tap. [. . . ]