User manual HOTPOINT WMSG 8018B CIS

[. . . ] Instructions for use WASHING MACHINE Contents GB English, 1 GB DE Deutsch, 13 SE Svenska, 25 Installation, 2-3 Unpacking and levelling Electric and water connections The first wash cycle Technical data Care and maintenance, 4 FI Suomi, 37 DK ES Dansk, 49 NO Norsk, 61 Cutting off the water or electricity supply Cleaning the washing machine Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose How to clean the detergent dispenser UK Українська, 73 Precautions and tips, 5 General safety Disposal Description of the washing machine, 6-7 Control panel Display How to open and shut the drum IWTE 61251 Running a wash cycle, 8 Wash cycles and options, 9 Table of wash cycles Wash options Detergents and laundry, 10 Detergent dispenser drawer Preparing the laundry Special wash cycles Load balancing system Troubleshooting, 11 Service, 12 1 Installation GB !Keep this instruction manual in a safe place for future reference. Should the appliance be sold, transferred or moved, make sure the instruction manual accompanies the washing machine to inform the new owner as to its operation and features. Read these instructions carefully: they contain vital information on installation, use and safety. [. . . ] To open the door while a cycle is in progress, press the START/PAUSE button; if the symbol is switched off the door may be opened. Press the START/PAUSE button again to restart the wash cycle from the point at which it was interrupted. This will be indicated by the text “END” on the display; when the symbol switches off (wait approximately 3 minutes) the door may be opened. Open the door, unload the laundry and switch off the machine. If you wish to cancel a cycle which has already begun, press and hold the button. The cycle will be stopped and the machine will switch off. If the selected option is not compatible with the programmed wash cycle, the indicator light will flash 8 Wash cycles and options Table of wash cycles Residual dampness % Total water lt Wash cycles Max. Load (kg) Description of the wash cycle Max. 2 Pairs 6 6 - - - 36’ 16’ The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected. 1) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 60°C. This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value. 2) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 40°C. This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value. For all Test Institutes: 2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C. 3) Long wash cycle for synthetics: set wash cycle 4; with a temperature of 40°C. Wash options Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled cotton and synthetic fabrics (refer to the “Table of wash cycles”). € ” enables you to wash in less time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity. It cannot be used with the 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, , , programmes. [. . . ] Anslut inloppsslangen till tvättmaskinen genom att skruva fast den till det avsedda vattenuttaget i den bakre delen uppe till höger (se figur). Genmontér panelet efter først at have sørget for, at krogene er indsat i åbningerne, inden panelet skubbes mod maskinen. 53 Beskrivelse af vaskemaskinen DK Betjeningspanel Tast Tast ON/OFF TEMPERATUR Taster med kontrollamper for valg af Tast med kontrollampe for FUNTION START/PAUSE DISPLAY PROGRAMMER Knappen Tast Tast CENTRIFUGERING FORSINKET START Tast ON/OFF : Tryk kort på tasten for at tænde eller slukke maskinen. hvis kontrollampen START/PAUSE blinker grønt langsomt , betyder det , at maskinen er tændt. [. . . ]