User manual HOTPOINT XH8 T2O XZH

[. . . ] When it is pressed, the SUPER indicator light illuminates (see Start-up and use). The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages. [. . . ] You can get the 0°C temperature, in standard conditions, when the fridge compartment temperature is at about 4°C. By decreasing the fridge temperature you decrease the CHILLER compartment temperature too. * Varies by number and/or position, available only on certain SHELVES: Due to the special guides the shelves are removable and the height is adjustable allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf. This will help maintain the temperature inside the Freezer, ensuring that foods are conserved for at least 12-18 GB To get more space inside your freezer, you can take out any Drawers (and flaps, if appropriate), from their slots, by putting your food directly on the provided shelves. Switching the appliance off During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: 1. Press the ON/OFF button to turn off the device 2. Pull the plug out of the socket TEMPERATURE Indicator light*: to identify the coldest area in Check that OK appears clearly on the indicator light (see The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. The removable accessories may be soaked in warm water and soap or dishwashing liquid. The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance. If the word "OK" does not appear it means that the temperature is too high:set the FRIDGE TEMPERATURE on a colder value, And then wait 10 hours until the temperature becomes stable. Check the indicator light again: if necessary, readjust it following the initial process. If large quantities of food have been added or if the refrigerator door has been opened frequently, it is normal for the indicator not to show OK. Wait at least 10 hours before you set the FRIDGE temperature on a colder value. Using the freezer to its full potential ?Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten (within 24 hours). Fresh food for freezing should not be placed in contact with the one already frozen; it should be placed in the lower FREEZER and STORAGE compartment that provides the best freezing rate. To freeze fresh food in the best and safest way possible, activate the SUPER function 24 hours before placing the food in the freezer. After placing the food inside, activate the SUPER function again; it will be deactivated automatically after 24 hours; ?Do not place glass bottles which contain liquids, and which are corked or hermetically sealed in the freezer because they could break. [. . . ] -It is not enough to turn off the device (with the ON/OFF button) to eliminate all electric contacts. In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance. Do not use any sharp or pointed utensils or electrical equipment - other than the type recommended by the manufacturer - inside the frozen food storage compartments. [. . . ]