User manual HP 1250

[. . . ] HP 1250 Fax series User Guide HP Fax 1250 series User Guide © Copyright 2006 Hewlett-Packard Development Company, L. P. The information contained herein is subject to change without notice. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright laws. ­ Food stamps Checks or drafts drawn on Governmental agencies Paper currency, traveler's checks, or money orders Certificates of deposit Copyrighted works Safety information Warning To prevent fire or shock hazard, do not expose this product to rain or any type of moisture. Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock. [. . . ] To change the copy settings for the current job only 1. Press Copy repeatedly to display the appropriate options. The following options are available: ­ Number of Copies ­ Reduce / Enlarge ­ Copy Quality ­ Copy Paper Size ­ Paper Type ­ Lighter / Darker User Guide 51 Chapter 6 2. 3. ­ Enhancements ­ Set New Defaults Press until the appropriate setting appears. Do one of the following: ­ To change more settings, press Copy. This selects the current setting and displays the next option. ­ To start the copy job, press Start Color or Start Black. To save the current settings as defaults for future jobs 1. Make any needed changes to the settings in the Copy Menu. Press Copy repeatedly until Set New Defaults appears. Press until Yes appears and then press OK. Stop copying Copy To stop copying Press Cancel on the control panel. 52 HP Fax 1250 series 7 Maintain the HP Fax The HP Fax requires little maintenance. Sometimes you might want to clean the glass strip inside the automatic document feeder to ensure that your copies remain clear. You will also need to replace, align, or clean your print cartridges from time to time. This section provides instructions for keeping the HP Fax in top working condition. Perform these simple maintenance procedures as necessary. Clean the HP Fax Print a self-test report Work with print cartridges Clean the HP Fax To ensure that your copies remain clear, you might need to clean the glass strip or white strip inside the automatic document feeder. You might also want to dust the exterior of the HP Fax. Clean the glass strip Clean the white strip Clean the exterior Clean the glass strip Minor debris can accumulate on the glass strip located inside the automatic document feeder. This can cause print quality issues such as streaks or lines to appear on your printouts. To clean the glass strip inside the automatic document feeder 1. Turn off the HP Fax, and unplug the power cord. Note Depending how long the HP Fax is unplugged, the date and time might be erased. You might need to reset the date and time later, when you plug the power cord back in. [. . . ] This precaution might be particularly important in rural areas. Note The REN assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface might consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. The REN for this product is 0. 1B, based on FCC Part 68 test results. Notice to users in Japan VCCI-2 Technical information Notice to users in the European Economic Area This product is designed to be connected to the analog Switched Telecommunication Networks (PSTN) of the European Economic Area (EEA) countries/regions. [. . . ]