User manual HP 15C

[. . . ] Bluetooth® is a trademark owned by its proprietor and used by Hewlett-Packard Development Company, L. P. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information is provided "as is" without warranty of any kind and is subject to change without notice. [. . . ] Tap Start > Messaging > New E-mail Account. Enter your e-mail address in the E-mail address box and tap Next. Scroll and select the Exchange server option from the Your e-mail provider list. Tap Next to synchronize outlook with your organization's Exchange e-mail server. In Server address, enter the Outlook Web Access server address and tap Next. NOTE: Select This server requires an encrypted (SSL) connection check box to ensure you always send e-mail from this account using an Secure Sockets Layer (SSL) connection. Enter the User name, Password, and Domain on the Edit Server Settings screen. Select the check box for the items you want to synchronize, and tap Finish. Synchronize e-mail 33 Internet e-mail Create a new POP3 or IMAP4 account You must set up an e-mail account that you have with an ISP or an account that you access using a VPN server connection (typically a work account) before you can send and receive e-mail. Tap Start > Messaging > New E-mail Account. Enter the account name and then Tap Next . Tap Menu > Stop Send/Receive to disconnect. Change e-mail download options You can customize the following download options for each e-mail account that you have with an ISP, or any account that you access using a VPN server connection (typically a work account). You can choose: Whether messages are downloaded automatically. If and how attachments are downloaded (IMAP4 only). To change the e-mail download options, do the following: 1. In the message list, tap Menu > Options. Tap Next until you reach Server information. Tap Next until you reach Message download Limit, and then select Entire Message Receive attachments check box. TIP: To send and receive messages automatically, tap Connect, check for messages and enter a time interval. Connecting automatically might result in higher connection charges. To save memory, limit the number of e-mails downloaded to your device by lowering the number of days to display. To change options for an Outlook e-mail account, tap Start > ActiveSync > Menu > Options. Delete an account 1. Tap and hold the account name, and tap Delete. Receive attachments An attachment sent with an e-mail message or downloaded from the server is displayed below the subject of the message. Tapping the attachment opens the attachment if it has been fully downloaded or marks it for download the next time you send and receive e-mail. [. . . ] Make sure you entered correct setting parameters, such as APN and IP addresses in data profile setup. Why does the HP iPAQ operate slowly at times? You should have at least 1. 5 to 2 MB of free memory space on your HP iPAQ so that the device operates efficiently. To check the free memory space, tap Start > Settings > System > Memory. Remember to delete or transfer old e-mail messages and pictures on your HP iPAQ to free available memory space. Why do I see the Today screen layout error message on my HP iPAQ display screen? You will get a Today screen layout error message if you did not select a Today screen layout. To correct this, tap Start > Settings > Personal and select a layout for the Today screen. I have trouble charging my battery. [. . . ]