User manual HP 2500CM

[. . . ] HP 2500C/C+/CM Professional Series Color Printer USER'S GUIDE Acknowledgments HP ColorSmart II, HP PhotoREt II and HP ZoomSmart Scaling Technology are trademarks of Hewlett-Packard Company. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. registered trademark of Adobe Systems Incorporated. [. . . ] This item displays the MIO print server firmware version. This item displays the total amount of RAM installed in the printer. This item displays the Service Identification Number of the printer. This number is needed when you call the HP Customer Care Center for support. 29 Self Test Menu Item PRINT MENU MAP PRINT PS FONT LIST PRINT DIAGNOSTIC PAGE PRINT EXT DIAGNOSTIC PAGE Explanation The Menu Map shows the layout of the Control Panel menu items. The PS Font List shows all the PS fonts currently available to the printer. The Diagnostic Page shows general printer information and current network parameters. The Extended Diagnostic Page shows printer information that is useful for troubleshooting. Print Quality Menu Item PRINT QUALITY= NORMAL Values NORMAL ECONOFAST BEST Explanation NORMAL: Normal mode delivers high quality output and is the recommended setting for speed and quality. Normal mode is the default setting for most paper types. EconoFast mode prints faster than Normal mode and delivers comparable output. Using EconoFast will also cut down on the frequency of replacing your ink cartridges because it uses less ink. EconoFast printing is available only when you select plain paper or transparency as the paper type. Best mode produces the highest print quality for all paper types. However, Best mode prints more slowly than Normal mode for most documents. 30 Printing Menu Item PAPER=LETTER Values LETTER LEGAL 13 x 19 A4 A3 11 x 17 JISB4 PORTRAIT LANDSCAPE Explanation Set the paper size. ORIENTATION= PORTRAIT Determine the default orientation of print on the page. Note: It is best to set the page orientation from the printer software or software application. APPEND CR TO LF= NO YES Select YES to append a carriage return to a line feed encountered in backward-compatible PCL jobs (pure text, no job control). Some environments indicate a new line using only the line feed control code. This option allows the user to append the required carriage return to each line feed. 31 IO Menu Item IN JOB TIMEOUT= 15 Values 5 to 300 Explanation Select the amount of time (in seconds) that the printer will wait within a print job before ending it. When the data from a print job fails to be sent to the printer completely, the printer will wait for the specified number of seconds. After that, it will abort the job and carry on to process the next print job. Press [Value] once to change the setting by increments of 1 or hold down [Value] to scroll. Select the amount of time (in seconds) that the printer will wait for the next print job before switching to another port. This is useful especially when your printer is connected to 2 different ports such as the parallel port and the network port. Press [Value] once to change the setting by increments of 1 or hold down [Value] to scroll. Select the amount of time (in seconds) that the printer will receive data from a port before switching to the next port. [. . . ] Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. *This printer contains Local Area Network (LAN) options. When the interface cable is attached to either of the IEEE802. 3 connectors, the printer meets the requirements of CISPR 22: 1993 Class A /EN 55022: 1994 Class A Singapore, May 1999 Chan Kum Yew, Quality Manager Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd, 31-41 Joseph Street, Blackburn, Victoria 3130, Australia European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh, Department HQ-TRE / Standards Europe, Herrenberger Straße 130, D-71034 Böblingen (FAX: +49-7031-14-3143) USA Contact: Corporate Product Regulations Manager, Hewlett-Packard Company, 3000 Hanover Street, Palo Alto, CA 94304 (Phone: 415-857-1501) 59 HP 2500C/C+/CM Regulatory Notices Power Cord Statement The power cord cannot be repaired. If it is defective it should be discarded or returned to the supplier. [. . . ]