User manual HP 40 14 INCH COLOR MONITOR

[. . . ] To avoid electric shock, do not remove the cover or back. There are no user serviceable parts inside. Refer servicing to qualified service personnel. Important Ergonomic Information: It is strongly recommended that you read HP's ergonomic information before using your HP monitor. [. . . ] Windows users: Setting the Timing Mode (Resolution and Refresh Rate) Example: 800 x 600 @ 75 Hz Resolution Right-click on the Windows desktop > Properties > Settings > "Desktop Area". Refresh Rate (vertical frequency) See your graphic card's user guide for instructions. 3. D-Sub Power 1 Front Panel Control FUNCTION SELECTION INCREASE DECREASE INCREASE Front view POWER ON/OFF SWITCH DECREASE LED 4 LED 3 LED 2 LED 1 10 9 8 7 6 5 4 3 2 1 Rear view POWER SOCKET SIGNAL CABLE, 15PIN D-SUB CONNECTOR 2 Feature 1. This monitor has Preset timing modes for customers. Push INC(+) and DEC(-) together and wait 0. 5 second to recall factory preset. Function description Symbol Item Power Switch Indicator FUNC INC(+) DEC(-) Function Increase Decrease Contrast Brightness Horizontal Position Horizontal Width Vertical Position Vertical Size Pincushion Controls Power. Scroll Led to Adjust Functions Increase Function Parameter Decrease Function Parameter Adjust Contrast Controls the brightness of the image. Controls the horizontal position of the image. Adjusts the horizontal size of the image. Adjusts the vertical position of the image. Controls the vertical edges of the image. Description 3 Timing modes VGA VESA VESA VESA VESA VESA VESA VESA VESA 640 x 350 @ 70HZ 720 x 400 @ 70HZ 640 x 480 @ 60HZ 800 x 600 @ 56HZ 640 x 480 @ 75HZ 640 x 480 @ 85HZ 800 x 600 @ 75HZ 800 x 600 @ 60HZ 1024 x 768 @ 60HZ Technical Information Technical Specification CRT Type Dot Pitch Phosphor Video Sync 14"(Viewable size 13. 2") 0. 28mm RGB, medium persistence RGB analogue H/V separate (TTL) H: 30-48KHz V:50-100Hz Video-in Power AC AC 15-pin D-SUB 3-pin plug 100-240V /50-60Hz 85 watts (typical) Input Signal Connectors Power Dimension Power saving modes Rear Voltage Consumption H393mm x D455mm x W433mm On DPMS Stand By DPMS Suspend DPMS Off <85W typical (green LED) <15W (orange LED) <15W (orange LED) <5W(orange LED) 4 Environmental Information HP has a strong commitment toward the environment. Your HP monitor has been designed to respect the environment as much as possible. HP can also take back your old monitor for recycling when it reaches the end of its useful life. HP has a product take-back program in several countries. The collected equipment is sent to of HP's recycling facilities in Europe or the USA. Special care is taken for batteries and other potentially toxic substances, which are reduced to non-harmful components through a special chemical process. If you require more details about Hp's product take-back program, contact your dealer or your nearest HP Sales Office. The cathode ray tube used in this monitor does not contain cadmium. Care and Cleaning Do not place anything on top of the monitor. Doing so may block the monitor vents and cause damage to the monitor due to overheating. Do not let liquid get on or into the monitor. To maximize screen life and prevent damage to the picture tube (such as burned phosphor due to leaving the same image on the screen for a long time), it is recommended that you: Use the monitor power management system (on HP computers) or a screen saver program. Avoid setting contrast and brightness to their maximum levels for prolonged periods. If you do not have a power management system or a screen saver program, switch the monitor off or reduce the brightness and contrast to minimum levels when the monitor is not in use. [. . . ] To the extent allowed by applicable local law, HP's liability for property damage does not exceed the greater of $50, 000 or the purchase price of the specific product that caused such damage. Part II ­ Year 2000 Warranty Subject to all of the terms and limitations of the HP Limited Warranty Statement provided with this HP Product, HP warrants that this HP Product will be able to accurately process date data (including, but not limited to, calculating, comparing, and sequencing) from, into, and between the twentieth and twenty-first centuries, and the years 1999 and 2000, including leap year calculations, when used in accordance with the Product documentation provided by HP (including any instructions for installing patches or upgrades), provided that all other products (e. g. hardware, software, firmware) used in combination with such HP Product(s) properly exchange date data with it. Internal controls have been adjusted to ensure safe operation. Only qualified personnel should perform any internal adjustments as specified in the service manual for this project. [. . . ]