User manual HP 52 15 INCH COLOR MONITOR

[. . . ] Ensure that the power outlet is easily accessible. There are no user serviceable parts inside. The monitor is quite heavy (the weight is shown in the technical specifications). We recommend you ask the assistance of a second person when lifting or moving it. [. . . ] The next time you switch back to SVGA, your previous settings are used automatically. To find out which resolutions are supported by your monitor, refer to "What Video Modes are Supported" on page 10. To change the screen resolution, please refer to the manual that came with your PC or your operating system documentation, if necessary. Your monitor has a Plug and Play capability (VESA DDC1/2B standard) that enables it to identify itself to suitably equipped HP PCs. This will automatically give you the best refresh rate for the resolution that you have set. To avoid screen flicker and minimize eye strain, use the highest supported image refresh rate for the chosen resolution, for example 85 Hz for 800 × 600. The image refresh rate is the number of times per second that the image is refreshed. To find out which image refresh rates are supported by your monitor, refer to "What Video Modes are Supported" on page 10. To set the image refresh rate (also known as the vertical frequency), refer to the manual that came with your PC or your operating system documentation, if necessary. If your PC supports Plug and Play, it will automatically select the best refresh rate for the screen resolution you have set. Your monitor has energy saving capabilities. If your PC supports VESA monitor power management, your monitor will be able to enter the following modes: This mode uses less than 60W. In this mode the screen blanks and the monitor's front panel indicator light is constantly amber. the monitor remains active , but no image is displayed. Move your mouse or press a key to instantly restore the monitor's image. In this mode the screen blanks, and the monitor's front panel indicator light is constant amber. to reactivate the screen , move your mouse or press a key. The monitor will restore the image after a few seconds. The screen blanks and the monitor's front panel indicator light blinks rapidly in amber. Refer to the manual that came with your PC. If your screen is not displaying an image, check the front panel indicator light first - your monitor may be in a power saving mode. What Video Modes are Supported All LEDs will flash when the frequency is out of range. [. . . ] Changes or modifications not expressly approved by Hewlett-Packard could void the user's authority to operate the equipment. When operating, this product emits x-rays; however, it is well shielded and meets the safety and health requirements of various countries, such as the Radiation Act of Germany and the Radiation Control for Health and Safety Act of the United States. Radiation emitted by this product is less than 0. 1 mR/hr (1uSv/hr) at a distance of 10 centimeters from the surface of the cathode ray tube. [. . . ]