User manual HP 55 15 INCH COLOR MONITOR

[. . . ] Connect the monitor only to a grounded power outlet. Use the power cord supplied with the monitor or one with a properly grounded plug. [. . . ] We recommend you ask the assistance of a second person when lifting or moving it. CAUTION Selecting a screen resolution/image refresh rate combination higher than 1024 × 768 at 60Hz can damage your monitor Status Indicator (LED) ON/OFF button FUNCTION Button Press FUNC to select the type of adjustment you require Adjustment Buttons Use to make the required adjustments Lights indicate the adjustment control selected and Anti-glare, anti-static coating, Horizontal 30 to 54 kHz Vertical 50 to 120 Hz 1024 x 768 (60 Hz) 30 minutes to reach optimum performance level 65 MHz Maximum Size: 260(W) x 195(H) mm AC 100 to 240 V, 50 to 60 Hz, Current 2A On 90W (max) LED : green Standby mode 15W (max) Suspend mode 15W (max) Off 8W (max) Temperature Humidity LED : amber LED : amber LED : amber 0 °C to 40 °C 10% RH through 85% RH (without condensation) -20 °C to 60 °C 10% RH through 85% RH (without condensation) Cabinet Dimensions 360(W) x 364(H) x 385(D) mm with stand Weight 12, 5 Kg Tilt/Swivel Stand Tilt Angle Swivel Angle -5° to 13° -90° to +90° Contrast (image white level) Brightness (image black level) The horizontal size of the displayed image If the vertical edges appear to curl in or Se as bordas verticais parecerem curvar-se para dentro ou para fora out If the vertical edges do not appear parallel Se as bordas verticais não parecerem paralelas Duc declares, that the product: oduc HP 15" Color Monitor Product Name: D8894A Model Number: ode conforms to the following product specifications: SAFETY - International: IEC 60950:1991 + A1 + A2 +A3 +A4 / GB4943-1995 - Europe: EN 60950:1992 + A1 + A2+A3 + A4 - CISPR 22:1993+A1 + A2 / EN 55022:1994 + A1 +A2 Class B1) EMC - EN 50082-1:1992 IEC 801-2:1992 / prEN 55024-2:1992 - 4kV CD, 8 kV AD IEC 801-3:1984 - 3V/m IEC 801-4:1988 / prEN 55024-4:1992 - 1 kV Power Lines - IEC 555-2:1982 + A1:1985 / EN 60555-2:1987 - IEC 61000-3-3:1994 / EN 61000-3-3:1995 - GB9254-1988 - FCC Title 47 CFR, Part 15 Class B2) - ICES-003, Issue 2 - VCCI-B - AS/NZ 3548:1992 Supplementary information: The product herewith complies with the requirements of the following Directives and carries the CE-marking accordingly: EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, both amended by the Directive 93/68/EEC. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission (FCC) Radio Frequency Interference Statement (USA Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one of more of the following measures: · Move the computer away from the radio or television. Plug the computer into a different electrical outlet, so that the computer and the radio or television are on separate electrical circuits. Make sure that all your peripheral devices are also FCC Class B certified. Make sure you use only shielded cables to connect peripheral devices to your computer. Hewlett-Packard's system certification tests were conducted with HP-supported peripheral devices and HP shielded cables, such as those you received with your system. [. . . ] The HP Color Monitor has been tested according to MPR 1990:8 for Emission properties and meets the guidelines as given by MPR 1990:10 (2. This Class "B" digital apparatus complies with Canadian ICES-003. [. . . ]