User manual HP 70 17 INCH COLOR MONITOR

[. . . ] HP D2837A HP D2839A 17-inch Color Monitors 15. 7 inch Viewable Image User's Guide 17-Zoll-Farbbildschirme 15. 7 Zoll Bildanzeige Benutzerhandbuch Moniteurs couleur 17 pouces Affichage 15, 7 pouces Guide de l'utilisateur Pantallas de color de 17 pulgadas 15. 7 pulgadas de imagen visualizada Manual del Usuario Léase esto primero Video a colori da 17 pollici 15. 7 effettivi per l'immagine Manuale utente Monitor Colorido de 17 polegadas Imagem Visível de 15. 7 polegadas Guia do Usuário Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HewlettPackard. [. . . ] To adjust the overall picture brightness (image black level), use this feature. Set so that the dark areas of the displayed image remain black. You can access the contrast and brightness features directly using the and controls respectively, and adjusting as required. DEGAUSS To degauss the monitor, select the DEGAUSS icon and press the enter key . Degaussing keeps the monitor free from unwanted magnetism that can result in color impurity. It is recommended that you degauss at least every week. Degaussing is accompanied by brief instability of the displayed image and a slight humming sound. BRIGHTNESS NOTE Adjusting the Size, Position and Shape of the Displayed Image RECALL To revert to the original position, shape and size settings of the displayed image, select the RECALL icon and use the and adjustment controls. To adjust the horizontal size of the displayed image, select the H-SIZE icon from the menu, and use the and adjustment controls to resize. To adjust the vertical size of the displayed image, select the V-SIZE icon from the menu, and use the and adjustment controls to resize. To adjust the displayed image if it appears to be compressed at the top or the bottom, select the V-LINEARITY icon from the menu, and use the and adjustment controls to correct this effect. V-LINEARITY ADVANCED Advanced Menu To access the advanced settings, select the ADVANCED icon from the main menu. Advanced Access Function Exit Menu COLOR TEMP. To adjust the tint of your monitor, select the COLOR TEMPERATURE icon from the advanced menu, and use the and adjustment controls to achieve the required color temperature. To adjust the language of the monitor's on-screen menu, select the LANGUAGE icon from the advanced menu, and use the and adjustment controls to select the required language. LANGUAGE 8 English HP 17" Color Monitor User's Guide Using Your Monitor HALF TONE To set the monitor's on-screen menu to half tone (semi-transparent), select the HALF TONE icon from the advanced menu and then press for ON. For a solid on-screen menu, switch the half tone off by pressing for OFF. Setting the Amount of Displayed Information To set the amount of displayed information, change the screen resolution of your PC. The higher the screen resolution, the more information you can see on the screen. It is recommended that you use a resolution of 1024 × 768 at 85 Hz or 1280×1024 at 60 Hz. This gives easy-to-read characters, a large amount of displayed information, and a flicker-free image. You can make adjustments to the displayed image and they are automatically saved for the resolution you are using. For example, if you adjust your monitor when working in SVGA those settings are saved for SVGA. If you then work in VGA and change the image settings, they are saved for VGA. The next time you switch back to SVGA, your previous settings are used automatically. DISPLAY TIMING To find out which resolution and refresh rate your monitor is currently running at, highlight the DISPLAY TIMING icon in the main menu. To find out which resolutions and refresh rates are supported by your monitor, highlight in the main menu then press to access the list of available resolutions. Use the and adjustment controls to scroll through the list. [. . . ] Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. 16 English HP 17" Color Monitor User's Guide Regulatory Information Regulatory Information DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer's Name: Manufacturer's Address: HEWLETT-PACKARD 5, Avenue Raymond Chanas - EYBENS 38053 GRENOBLE CEDEX 09 FRANCE D2837A - HP 70 17-inch Color Monitor D2837-60*1* declares, that the product: Product Name: Model Number: conforms to the following Product Specifications: SAFETY International: IEC 60950:1991 + A1 + A2 +A3 +A4 Europe: EN 60950:1992 + A1 + A2 +A3 +A4 CISPR 22:1993+A1 / EN 55022:1994 - Class B 1) EN 50082-1:1992 IEC 801-2:1992 / prEN 55024-2:1992 - 4kV CD, 8 kV AD IEC 801-3:1984 - 3V/m IEC 801-4:1988 / prEN 55024-4:1992 - 1 kV Power Lines IEC 555-2:1982 + A1:1985 / EN 60555-2:1987 IEC 1000-3-3:1994 / EN 61000-3-3:1995 FCC Title 47 CFR, Part 15 class B 2) / ICES-003, Issue 2 Supplementary information: The product herewith complies with the requirements of the following Directives and carries the CE mark accordingly: the EMC Directive 89/336/EEC, the Low Voltage Directive 73/23/EEC both amended by the Directive 93/68/EEC. 1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer systems. 2) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EMC Grenoble, October 1998. Jean Marc JULIA Quality Manager For Compliance Information ONLY, contact: USA contact: Hewlett-Packard Company, Corporate Product Regulations Manager, 3000 Hanover Street, Palo Alto, CA 94304. [. . . ]