User manual HP 9000 MODEL 747I WORKSTATION

[. . . ] Models 745i/50, 745i/100, 747i/50, and 747i/100 Owner's Guide for HP-UX Users HP 9000 Series 700i Industrial Workstations ABCDE HP Part No. A2628-90014 Printed in USA August 1993 Edition 1 E0893 DRAFT 2/5/97 11:31 FINAL TRIM SIZE : 7. 0 in x 8. 5 in Legal Notices The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and tness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Please read the enclosed Hewlett-Packard Software Product License Agreement and Limited Warranty before operating this product. [. . . ] After hardware installation has been completed, you'll need to ensure that your operating system is prepared to exchange data with the device. This section provides instructions for doing this. If you wish to initialize a new disk, make sure you have the disk loaded in the drive. Run SAM by typing: /usr/bin/sam 5 To get help in SAM, pressing the 4f15 key gives you context-sensitive information for the object at the location of the cursor. Choose Disks and File Systems (highlight and click on NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN 4OK5 or press 4Return5). 4. Choose CD-ROM, Floppy, and Hard Disks . NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN 5. From the Actions menu, select Add a Floppy Disk Drive. . . You will see a list of unused disks, including the new one you have connected. NNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN 5-14 Configuring HP-UX for Printers and Drives 2/5/97 DRAFT 11:31 FINAL TRIM SIZE : 7. 0 in x 8. 5 in 6. Choose the line identifying the model of the new disk. If the device you have connected does not appear on the list: a. Check your hardware connections, and make sure that the device is turned on. Click on the button Device Missing , and you will be given the following options: i. Have SAM rescan the system for the device. If you have connected the device after starting SAM, you should click on Yes . Otherwise, click on No . NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNN NNNNNNNN ii. Respond to the conrmation screen regarding whether the device is connected and powered up. Respond to the conrmation screen regarding whether additional device drivers are needed. You will be given an information screen suggesting things to try if the device still cannot be found. After you highlight the device, note that the Initialize disk button is toggled on (the default). Click on this button to turn it o if you do not wish to initialize a disk (or if the disk is preformatted). Click on OK when you have nished with this form. NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNN 5 9. A \Messages" Box appears, reporting the progress of the task. [. . . ] This mode is brought about by execution of shutdown(1). The instruction-processing module of the computer. Glossary standard error The destination of error and special messages from a program, intended to be used for diagnostic messages. The standard error output is often called stderr, and is automatically opened by the shell for writing on le descriptor 2 for every command invoked. Standard error usually appears on the display unless it is directed otherwise. [. . . ]