User manual HP BUSINESS INKJET 2200 Reference Guide

[. . . ] Acknowledgments HP ColorSmart III, PhotoREt III, and HP ZoomSmart Scaling Technology are trademarks of Hewlett-Packard Company. Microsoft®, MS Windows®, Windows®, and Windows NT® are U. S. registered trademarks of Microsoft Corporation. Macintosh® and Apple® are registered trademarks of Apple Computer, Inc. [. . . ] Configure whether or not a carriage return (CR) is appended to each line feed (LF) encountered in a backward compatible PCL job (pure text, no job control). Select the PCL symbol set. NO YES PCL FONT PITCH PCL FONT POINT SIZE PCL SYMBOL SET 0. 44 - 99. 99 4. 00 - 99. 00 Set of options 5-2 Configuration Menu Message PERSONALITY Value AUTO PCL5 ONLY PS ONLY CLEARABLE WARNINGS AUTO ON Description Sets the personality used to process the job. The PCL5 and PS option is only available if the personality card is inserted. When ON is selected, clearable warnings are displayed until RESUME is pressed. When JOB is selected, clearable warnings are displayed until end of job. When ON is selected, ink low condition is displayed. When OFF is selected, ink low condition is not displayed. JOB INK LOW WARNINGS ON OFF Reset Menu Message RESTORE FACTORY SETTINGS Value N. A. Description Restores all values to the printer's predetermined factory values. Postscript Menu Note: This menu is only available with HP Business Inkjet 2250 printers or HP Business Inkjet 2200 printers with the Postscript/PCL5 Upgrade. Message PRINT PS ERRORS = OFF Value OFF ON Description Select ON to print the PS error page when PS errors occur. EIO Menu Note: This menu is only available on HP Business Inkjet 2200/2250 printers with an HP JetDirect EIO print server card installed. Message CFG NETWORK Value NO YES Description Selects whether or not you want to access the JetDirect menu items. You must change this option to YES each time you want to access the JetDirect EIO menu. 5-3 Message IPX/SPX DLC/LLC TCP/IP ETALK CFG IPX/SPX Value ON OFF Description Selects whether or not a protocol is enabled or disabled. Change it to OFF to disable a protocol. NO YES Selects whether you want to access the IPX/SPX menu and set the IPX/SPX protocol parameters. In the IPX/SPX menu, you can specify the Frame Type parameter used on your network. · The default is AUTO, which automatically sets and limits the Frame type to the one detected. · For Ethernet cards, frame type selections include EN_8023, EN_II, EN_8022, EN_SNAP. · For Token Ring cards, frame type selections include TR_8022, TR_SNAP. In the IPX/SPX menu for Token Ring cards, you can also specify NetWare Source Routing parameters, which include SRC RT=AUTO (default), OFF, SINGLE R or ALL RT. CFG TCP/IP NO YES Selects whether you want to access the TCP/IP menu and set the TCP/IP protocol parameters. In the TCP/IP menu, you can specify BOOTP=YES for TCP/IP parameters to be automatically configured by a BootP or DHCP server when the printer is turned on. If you specify BOOTP=NO, you can manually set the following TCP/IP parameters from the control panel: Each byte of the IP address (IP) · Subnet Mask (SM) · Syslog Server (LG) · Default Gateway (GW) · Idle Timeout period (default is 90 seconds, 0 disables the timeout) When setting IP numbers, press the Value button to increase the number by 1. Hold down the Value button to increase the number by 10. Press the Resume button to make your selection. 5-4 Message CFG ETALK Value NO YES Description Selects whether you want to access the EtherTalk menu and set the AppleTalk phase parameter (ETALK PHASE=1 or 2) for your network. Resetting the EIO Card To restore the factory default values to HP JetDirect EIO print server card: 1. While holding down the Item and Resume buttons on the printer's control panel, turn on the printer. All previously stored EIO settings will be lost. Understanding Printer Messages Message CANCELLING JOB PAPER JAM, OPEN COVER AND CLEAR PAPER [COLOR] INK CARTRIDGE EMPTY REPLACE [COLOR] INK CARTRIDGE [COLOR] INK CARTRIDGE MISSING Explanation The printer is canceling the current print job. [. . . ] HP shall have no obligation to repair, replace, or refund until the customer returns the defective product to HP. Any replacement product may be either new or like new, provided that it has functionality at least equal to that of the product being replaced. HP products may contain remanufactured parts, components, or materials equivalent to new in performance. HP's Limited Warranty Statement is valid in any country where the covered HP product is distributed by HP. [. . . ]