User manual HP COLOR LASERJET CP4005

[. . . ] HP Color LaserJet CP4005 User Guide HP Color LaserJet CP4005 User Guide Copyright and License © 2006 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] This is the default printer setting, and the most common layout used, with every printed image oriented right-side-up. Facing pages are read from top to bottom on the left page, then from top to bottom on the right page. This layout is often used with clipboards. Every other printed image is oriented upside-down. Facing pages are read continuously from top to bottom. 2 3 Short-edge landscape Long-edge portrait 4 Short-edge portrait1 1 When using Windows drivers, select Flip Pages to see the designated binding options. Manual two-sided printing If you want to print on two sides (duplex) on paper other than the supported sizes or weights (for example, paper heavier than 120 g/m2 (32 lb) or very thin paper), you will have to go to the printer and reinsert the paper manually after the first side has printed. NOTE Damaged or previously used paper can cause paper jams and should not be used. NOTE Manual two-sided printing is not supported for systems that use the PS driver. 112 Chapter 4 Printing tasks ENWW To manually print on two sides (duplex) 1. Ensure that the printer driver is configured to allow manual duplexing. For more information, see Printer drivers or Printer drivers for Macintosh computers. In the printer driver, select Allow Manual Duplex. From the application, open the printer driver. On the Finishing tab, click Print on Both Sides or Print on Both Sides (Manually). The default binding option is to bind on the long edge of the paper in portrait layout. To change the setting, click the Finishing tab, and select the Flip pages up checkbox. The Print on Both Sides instructions will appear. Follow the instructions to finish printing your document. NOTE If the total number of sheets to be duplexed exceeds the Tray 1 capacity for manual duplex jobs, feed the top 100 sheets and press . When prompted, feed the next 100 sheets and press . Repeat as necessary until all the sheets from the output stack have been loaded into Tray 1. For more information, see Printer drivers or Printer drivers for Macintosh computers. 2. 6. Printing booklets You can use some versions of the printer driver to control the booklet printing when duplexing. You can select binding on the left or right side on letter, legal, or A4 paper size. [. . . ] media The paper, labels, transparencies, or other material on which the printer prints the image. memory tag A memory partition with a specific address. MIME An acronym for Multipurpose Internet Mail Extensions. Devoid of color. monochrome mopy The HP term for "multiple original prints" capability. [. . . ]