User manual HP COMPAQ CORPORATE VALUE MONITORS 17 INCH

[. . . ] User Guide v75, m705, mx705, CV7540, MV7540, s7540, FS7600, v7650 17" CRT Monitors Document Part Number: 368239-004 January 2006 This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting, regulatory notices, and technical specifications. Enhanced for Accessibility © Copyright 2004, 2006 Hewlett-Packard Development Company, L. P. The information contained herein is subject to change without notice. Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U. S. Intel, Pentium, Intel Inside, and Celeron are trademarks of Intel Corporation in the U. S. [. . . ] This file is activated from within graphics programs that support this feature. in accordance with The ICM color profile is written(ICC) Profile Formatthe International Color Consortium specification. Installing the . INF and . ICM Files After you determine that you need to update, you can install the . INF and . ICM files from the CD or download them. Installing from the CD To install the . INF and . ICM files on the computer from the CD: 1. Insert the CD in the computer CD-ROM drive. View the "INF and ICM Readme" file. Select "Install INF and ICM Files. " 4. After the INF software has been installed, restart Windows. 4­2 User Guide Operating the Monitor 6. Ensure that the proper resolution and refresh rates appear in the Windows Display control panel. digitally signed monitor . INF and You may need to install thethe CD in the event of an installation . ICM files manually from error. Refer to the INF and ICM Readme file on the CD. Downloading from the Worldwide Web To download the latest version of . INF and . ICM files from the HP monitors support Web site: 1. Refer to http://www. hp. com/support and select your country region. Follow the links for your monitor to the support page and download page. Ensure your system meets the requirements. Download the software by following the instructions. User Guide 4­3 Operating the Monitor Front Panel Controls Item Icon menu Name menu Function Launches on-screen displays and exits the menus and On-Screen Display. Moves backward through menu options or decreases adjustment levels. Moves forward through menu options or increases adjustment levels. Selects function and adjustment levels in the OSD menu Controls power to the monitor. The LED on the power button indicates the state of the monitor. 1 Left Adjustment 2 Right Adjustment 3 4 select select Power/LED 5 4­4 The icon for the power/LED varies on select models. User Guide Operating the Monitor On-Screen Display The On-Screen Display (OSD) adjusts the screen image based on your viewing preferences. If the monitor is not already on, press the power button to turn on the monitor. Press the menu button to display the On-Screen Display menu. For a description of the icons that appear on the screen, see "On-Screen Display Functions" later in this chapter. 3. To move to a function, press the Right-Adjustment or Left-Adjustment button on the front panel of your monitor until the function is highlighted. Press the select button on the monitor to choose the function. User Guide 4­5 Operating the Monitor 5. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]