User manual HP COMPAQ DC5850 SMALL FORM FACTOR PC AHCI AND RAID ON COMPAQ DC5850 BUSINESS PCS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HP COMPAQ DC5850 SMALL FORM FACTOR PC. We hope that this HP COMPAQ DC5850 SMALL FORM FACTOR PC user guide will be useful to you.
Lastmanuals help download the user guide HP COMPAQ DC5850 SMALL FORM FACTOR PC.
You may also download the following manuals related to this product:
HP COMPAQ DC5850 SMALL FORM FACTOR PC PROTECT TOOLS GUIDE (1570 ko)
HP COMPAQ DC5850 SMALL FORM FACTOR PC TROUBLESHOOTING GUIDE (1472 ko)
HP COMPAQ DC5850 SMALL FORM FACTOR PC DESKTOP MANAGEMENT GUIDE (1411 ko)
HP COMPAQ DC5850 SMALL FORM FACTOR PC SUPPORT TELEPHONE NUMBERS (502 ko)
HP COMPAQ DC5850 SMALL FORM FACTOR PC COMPUTER SETUP (F10) UTILITY GUIDE (424 ko)
HP COMPAQ DC5850 SMALL FORM FACTOR PC QUICK SETUP AND GETTING STARTED GUIDE (4178 ko)
HP COMPAQ DC5850 SMALL FORM FACTOR PC SERVICE REFERENCE GUIDE: COMPAQ DC5850 BUSINESS PC (10194 ko)
HP COMPAQ DC5850 SMALL FORM FACTOR PC HARDWARE REFERENCE GUIDE - SMALL FORM FACTOR MODELS (4125 ko)
HP COMPAQ DC5850 SMALL FORM FACTOR PC QUICK SETUP AND GETTING STARTED GUIDE ENHANCED FOR ACCESSIBILITY (6641 ko)
HP COMPAQ DC5850 SMALL FORM FACTOR PC ILLUSTRATED PARTS & SERVICE MAP: COMPAQ DC5850 SMALL FORM FACTOR BUSINESS PC (234 ko)
Manual abstract: user guide HP COMPAQ DC5850 SMALL FORM FACTOR PCAHCI AND RAID ON COMPAQ DC5850 BUSINESS PCS
Detailed instructions for use are in the User's Guide.
[. . . ] Advanced Host Controller Interface (AHCI) and Redundant Array of Independent Disks (RAID) on HP Compaq dc5850 Business PCs Using AMD Array Management Software (RAIDXpert)
Introduction . . 4 RAID 0 with two hard drives (Striped) . . 4 RAID 1 with two hard drives (Mirror) . . 8 HP Backup and Recovery interactions . [. . . ] previous RAID configuration information JBOD = Just a bunch of drives LD = Logical Drive
11
Configuring RAID on non-factory preinstalled configurations
The remaining sections of this white paper describe steps to set up supported RAID configurations where customers have not purchased factory preinstalled RAID configurations. WARNING: Before configuring RAID in the Option ROM interface, be sure to back up all data. Once a RAID configuration is saved, the drives will no longer be bootable until an operating system is re-installed. NOTE: You will need a diskette drive to use the downloaded HP softpaq required for Windows XP CD or Microsoft Vista DVD installation. The softpaq must be downloaded to a diskette.
Enabling RAID through F10 System BIOS
1. Turn on or restart the computer by clicking Start > Shut Down > Restart the Computer. Press F10 as soon as the monitor light turns green. If you do not press F10 at the appropriate time, you must restart the computer, and then press F10 again to access the utility. Select your language from the list, and then press Enter. Use the arrow keys to select the Storage menu. Use the down arrow key to select Storage Options, and then press Enter.
6. On the Storage Options menu, use the down arrow key to select SATA Emulation. Press the right arrow key until AHCI RAID displays, and then press F10 to accept. · · If you do not want to apply your changes, select Ignore Changes and Exit. To reset to factory settings, select Apply Defaults and Exit. To apply and save changes, select File > Save Changes and Exit.
12
NOTE: Applying default settings never changes or resets the SATA Emulation mode (RAID vs. This setting must always be changed by selecting the appropriate mode from the F10 Setup Utility under Storage Options. CAUTION: Do NOT turn the computer power off while the ROM is saving the F10 Computer Setup changes because the CMOS could become corrupted. Only turn the computer off after exiting the F10 Setup screen.
Configuring RAID Option ROM
Before proceeding you will need the following: · · Microsoft Windows XP CD-ROM or Microsoft Vista DVD and Product Key. To create one, go to www. hp. com/support. Select your country and language, select Download drivers and software, enter the model number of the computer, and press Enter.
You can only access Computer Setup at system startup. To access the Computer Setup Utilities menu and enable RAID: 1. [. . . ] In Tree view, under Administrative Tools, click on the User Management icon.
2. In the User Management Window, click on the admin link.
19
3. If you want to change the default password, type the new password into the New Password field. Use up to 8 letters and numbers but no spaces or other characters. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HP COMPAQ DC5850 SMALL FORM FACTOR PC
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HP COMPAQ DC5850 SMALL FORM FACTOR PC will begin.
