User manual HP COMPAQ EVO D510 E-PC

[. . . ] b Quick User's Guide Compaq Evo D510 e-pc Document Part Number: 303399-001 5970-5295-EN August 2002 This book will help you with the initial hardware and software setup for the Compaq Evo D510 e-pc. © 2002 Compaq Information Technologies, L. P. Compaq, the Compaq logo, and Evo are trademarks of Compaq Information Technologies Group, L. P. Microsoft and Windows are trademarks of Microsoft Corporation in the U. S. All other product names mentioned herein may be trademarks of their respective companies. [. . . ] Download the latest driver from the Compaq Web site www. compaq. com/support (search for Evo D510 e-pc). Download the latest BIOS from the Compaq Web site www. compaq. com/support (search for Evo D510 e-pc). Replace the batteries. Your keyboard uses batteries, and the batteries need to be replaced. The mouse cable is not correctly connected. 1. Switch off the PC (not necessary with a USB mouse). Plug the cable into the correct connector on the back of the PC (color coding is used for easy matching). Switch on the PC. You are not using the latest BIOS. Download the latest BIOS from the Compaq Web site www. compaq. com/support (search for Evo D510 e-pc). Quick User's Guide 2­5 Troubleshooting Solving Minor Problems (Continued) Problem Cause The mouse is dirty (does not apply to optical mouse). Solution Clean the mouse ball as shown below. The mouse itself is defective. Your mouse uses batteries, and the batteries need to be replaced. Replace the mouse by a known working unit or try the mouse with another PC. Replace the batteries. 2­6 Quick User's Guide Troubleshooting Solving Hardware Installation Problems You may need to reconfigure the computer when you add or remove hardware, such as an additional diskette drive. If you install a plug and play device, Windows 2000 and Windows XP automatically recognize the device and configure the computer. If you install a non­plug and play device, you must reconfigure the computer after completing installation of the new hardware. In Windows 2000 and Windows XP, select the Add New Hardware icon in the Control Panel and follow the instructions that appear on the screen. Solving Hardware Installation Problems Problem A new device is not recognized as part of the system. Cause Cable(s) of new external device are loose or power cables are unplugged. Power switch of new external device is not turned on. When the system advised you of changes to the configuration, you did not accept them. Solution Ensure that all cables are properly and securely connected and that pins in the cable or connector are not bent down. Turn off the computer, turn on the external device, then turn on the computer to integrate the device with the computer system. Reboot the computer and follow the instructions for accepting the changes. Quick User's Guide 2­7 A Replacing the Battery The battery that comes with your computer provides power to the real-time clock and has a minimum lifetime of about three years. When replacing the battery, use a battery equivalent to the battery originally installed on your computer. Your computer comes with a 3-volt lithium coin cell battery. be extended by plugging The lifetime ofathe lithium battery canThe lithium battery is only the computer into live AC wall socket. [. . . ] The installation guides included with the monitor provide configuration information. Laser Safety All Compaq systems equipped with a laser device comply with safety standards, including International Electrotechnical Commission (IEC) 825. With specific regard to the laser, the equipment complies with laser product performance standards set by government agencies as a Class 1 laser product. The product does not emit hazardous light; the beam is totally enclosed during all modes of customer operation and maintenance. ÅI I I WARNING: To reduce the risk of exposure to hazardous radiation: Do not try to open the laser device enclosure. There are no user-serviceable components inside. [. . . ]