User manual HP COMPAQ FLAT PANEL TFT1501

[. . . ] Compaq TFT1501 15-inch LCD Monitor (15-inch Viewable Image) User's Guide 1 The information in this document is subject to change without notice. Hewlett-Packard® Computer Corporation (hereafter HP Company) makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. HP assumes no responsibility for the use or reliability of its software on equipment that is not furnishing by HP. [. . . ] Press the Select ( ) button to select it. This will open the CONTRAST (or BRIGHTNESS) bar with associated numeric value for your adjustment onscreen. 4. Press the Up ( ) or Down ( ) buttons to adjust its value. The range for adjustment is from 0 to 100. Pressing the Up ( ) button will increase the numeric value of the setting and pressing the Down ( ) button will decrease it. Adjusting the OSD Display To adjust the OSD display, follow the steps below: 1. Open the OSD Main Menu by selecting the Select ( ) button. 2. Press the Up ( ) or Down ( ) buttons to move forward or backward to the OSD Display icon and highlight it. Select EXIT to exit the OSD Display submenu and go back to the Main Menu. This will open the OSD Display submenu with five 17 You may determine how long the OSD will stay onscreen by selecting the OSD TIMEOUT option. Increase or decrease the OSD display time by pressing the Up ( ) or Down ( ) buttons in the OSD TIMEOUT submenu. The maximum timeout setting is 60 seconds. You may turn on or off the displayed image information by selecting the INFORM ON-OFF option. Turn this option on to display information onscreen that informs you when the input signal has been changed. If you want to put your OSD menu on a certain location on the screen, select the H . Press the Up ( ) or Down ( ) buttons to change the OSD position in the submenus using these two options. Reverting to Factory Default Settings If you have made some incorrect adjustments in the OSD menus and you don't know how to get back to a good setting, don't worry. The MODE RECALL feature will return you to a good starting point: the factory settings. To do a MODE RECALL, follow the steps below: 1. Open the OSD Main Menu by pressing the Select ( ) button. 2. Press the Up ( ) or Down ( ) buttons to move forward or backward to the MODE RECALL icon and highlight it. Press the Select ( ) button to select it. This will return you to the factory settings immediately. Note: MODE RECALL will return you the following settings: H . POSITION of the displayed image and OSD menu, BRIGHTNESS and CONTRAST, CLOCK AND PHASE. COLOR will be set to WHITE. 18 Checking Other Information about Your Monitor There is some useful information available to you with the OSD display. These include BACKLIGHT INFO, SERIAL NUMBER and MODE INFO. [. . . ] These demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. 29 January, 1999 33 Below you will find a brief summary of the environmental requirements met by this product. [. . . ]