User manual HP COMPAQ MICROPORTABLE PROJECTOR MP1800

[. . . ] Notice 2000 Compaq Computer Corporation. COMPAQ and the Compaq logo Registered in U. S. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. [. . . ] Insert the hooks on top of the Multimedia Adapter into the upper slots on the projector by inserting and pushing upward, then insert the adapter plug into the digital connector on the back of the projector. Release the buttons on the sides of the Multimedia Adapter to complete the connection. When the adapter is activated, one of the LEDs 4 on the Multimedia Adapter turns green. Using the Compaq Multimedia Adapter 3-3 Connecting a Camcorder, Videocassette Recorder, or DVD Player to the Compaq Multimedia Adapter A rubber boot cover protects the DFP (digital) connector on the projector. Be sure to remove the cover before connecting the Multimedia Adapter to the projector and replace the cover when the projector is not in use to prevent electrostatic discharges from damaging the connector. 1. Use an RCA cable to connect a videocassette recorder to the video connector on the Multimedia Adapter. To play audio through the Multimedia Adapter, connect an audio cable to the source audio-out jack and the audio-in jack on the Multimedia Adapter . Use an S-video cable to connect a camcorder or DVD player to the S-video connector on the Multimedia Adapter. Connect one end of the power cord into the back of the projector and the other end to an electrical outlet that is easily accessible and close to the projector. Press the Source button on the Multimedia Adapter to select different input sources. 3-4 Using the Compaq Multimedia Adapter The Compaq Multimedia Adapter can remain attached to the projector, or it can be removed and stored in the carrying case. Using the Compaq Multimedia Adapter 3-5 Connecting a Video Player If your video player uses a round, one-prong composite video connector, use the RCA video cable. If your video player uses a round, four-prong S-video connector, use the S-video cable. Both cables are included with the Compaq Multimedia Adapter. 1. Plug the RCA video cable into the video-out port on the video player and the video port on the video adapter. If you are using the S-video cable, connect it to the S-video out connector on the video player and the S-video port on the video adapter. Turn on the projector first, then the video player. Press the Source button on the back of the Multimedia Adapter to switch the projector signal from data (computer icon) to video (TV icon). The data mode receives computer inputs and the video mode receives video input such as a TV tuner, videocassette recorder, or camera. With the Compaq Multimedia Adapter attached, the projector is compatible with major video standards such as NTSC, PAL, and SECAM. Use the on-screen menu to adjust the video performance manually or press the Resync button to optimize it automatically. 3-6 Using the Compaq Multimedia Adapter Video On-Screen Menu Adjustments When the Multimedia Adapter is attached to the projector and the video source is selected, an alternate video on-screen menu can be displayed on the projected screen. This menu includes some selections that are relevant to the functions of the Multimedia Adapter. Attach the Multimedia Adapter to the projector. Set the Source button on the adapter or remote control to video. Press the Select button on the projector or the Menu button on the remote control to display the following menu: Video Menu Brightness Contrast Zoom Video Menu Level 2 Adjustment scale Adjustment scale Zoom Panning left-right Panning up-down Save and return Cancel Adjustment scale (Color temperature) Custom color Saturation Save and return Cancel Adjustment scale Adjustment scale Deutsche English Espanol Francais Italiano Nederlands Brazilian Portuguese Save and Return Video Menu Level 3 Adjustment scale Adjustment scale Adjustment scale Keystone Color Adjustment scale Adjustment scale Tint Sharpness Language Continued Using the Compaq Multimedia Adapter 3-7 Video On-Screen Menu (continued) Video Menu Video Menu Level 2 Audio Mute Volume Bass Treble Cancel Save and return S-Video Composite DVI Analog Save and return On - off Location Source Save and return Up-down Left-right Save and return Cancel Power saver Lamp hours Reset lamp hours Standby lamp delay Flip image Serial number Master reset Save and return Cancel Confirm reset Video Menu Level 3 On - Off Adjustment scale Adjustment scale Adjustment scale Source Picture in Picture (toggles 5 locations) Composite, S-Video Adjustment scale Adjustment scale Menu Location Management On-off Display hours - 5 digits Confirmation Delay adjustment Horizontal - vertical both Display serial number Confirmation Factory reset Exit Current mode To make adjustments to the video on-screen menu, follow the steps in "Adjusting the On-Screen Menus" in Chapter 2. 3-8 Using the Compaq Multimedia Adapter Explaining Functions in the Video On-Screen Menu In addition to the analog on-screen menu functions, the video onscreen menu includes the following additional functions: !" !" !" Tint-adjusts screen image tint. Sharpness-adjusts screen image sharpness. [. . . ] Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-652-6672 (1-800-OK COMPAQ) For questions regarding this FCC declaration, contact: Compaq Computer Corporation P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. B-2 Agency Regulatory Notices European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European norms: I EN55022 (CISPR 22) - Radio Frequency Interference EN50082-1 (IEC801-2, IEC801-3, IEC801-4) - Electromagnetic Immunity EN60950 (IEC950) - Product Safety I I Japanese Notice Agency Regulatory Notices B-3 Specifications Compaq MP1800 Microportable Projector Projection panel Lamp type Image size Avg. lamp life in hours Projection distance Maximum weight (unpacked) Maximum dimensions Maximum graphics resolution Displayable colors Horizontal frequencies XGA 1024 × 768 × 1 120 watt High Brightness Lamp See the Image Size Adjustment table. [. . . ]