User manual HP COMPAQ T5515 THIN CLIENT ADMINISTRATOR'S GUIDE: LINUX-BASED COMPAQ T5125, T5515, T5525 THIN CLIENTS - FO

[. . . ] Administrator's Guide Linux-based HP Compaq t5125, t5515, t5525 Thin Clients For the following image versions: - L1ST3149 (t5125) - L3ST3149 (t5515) - 128MB model only - L4ST3149 (t5525) Document Part Number: 395346-003 October 2005 This guide provides network administrators with basic instructions for configuring Linux-based thin clients. © Copyright 2005 Hewlett-Packard Development Company, L. P. The information contained herein is subject to change without notice. Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U. S. Adobe, Acrobat, and Acrobat Reader are trademarks or registered trademarks of Adobe Systems Incorporated. [. . . ] You can open the XFce Settings Manager in any of the following ways: Click the Settings button on the HP Connection Administrator window. Click GO, and then select Settings (t5515/t5525 only). Right-click on the desktop and select Settings. Administrator's Guide www. hp. com 4-1 XFce Settings Manager XFce Settings Manager XFCE Settings whether the Icons inuser is logged inManager vary depending onsome icons current a root account. In addition, require root user access. 4-2 www. hp. com Administrator's Guide XFce Settings Manager Date/Time The Date/Time Properties utility allows you to set the date and current time, select the appropriate time zone, and enable NTP (Network Time Protocol). Date/Time Properties Use the values in the Date, Time, and Time Zone areas to select the appropriate date and time information. Select Monday First to configure the monthly calendar show Monday as the first day of the week. Enabling Network Time Protocol NTP is a protocol designed to synchronize the clocks of computers over a network. There are numerous servers available on the Internet that are synchronized to Coordinated Universal Time (UTC). In the NTP Server box, type the IP address of the NTP server you want to use to set the time on the thin client. For NTP to function properly, the date on the thin client must match the date on the server. Click Apply. Administrator's Guide www. hp. com 4-3 XFce Settings Manager Configuring the system hardware clock from BIOS You can set the system hardware clock to your local date and time using the BIOS setup utility as follows: 1. After the Setup utility displays, press Esc. Select the standard CMOS features option, and then press Enter. Set the date and time using the Page Up and Page Down keys. To save the changes, press F10, and then press Enter. Desktop: backdrop You can use the Background Settings utility to change the backdrop color or to browse for an image to use as the desktop's backdrop. You can change the background image to any . jpg or . png image. Background Settings 4-4 www. hp. com Administrator's Guide XFce Settings Manager Using an image for your background To change the background image: 1. From the XFce Settings Manager, click Desktop: backdrop. Click OK. Changing background color To change the background color: 1. From the XFce Settings Manager, click Desktop: backdrop. Select the desired color, and then click OK. Select Use color only. HP Desktop Options The Linux-based image features the following desktop interface options: HP Connection Administrator Citrix ICA Client xfce (t5515/t5525 only) HP Connection Administrator is the default interface. Desktop Options includes the features in the following sections. Administrator's Guide www. hp. com 4-5 XFce Settings Manager VNC Shadow VNC Shadow allows the administrator to remotely observe or take control of the user's desktop. HP Desktop Options VNC Shadow: Select to enable remote access to the thin client. Read Only Mode: Select to prevent the remote access session from making changes to the unit. Advise User of Monitoring: Select to display a message that informs the logged on user that their session is about to be monitored. You can customize the message by typing text in the box. [. . . ] Reboot the client and launch the F10 System Configuration Setup Screen. Select the Advanced BIOS Features option and press Enter. Select the First Boot Device option and press Enter. Altiris Deployment Server Console Actions 1. [. . . ]