User manual HP COMPAQ T5725 THIN CLIENT

[. . . ] TeemTalk 5. 0 for Unix User's Guide UK Neoware UK Ltd Host Access Business Unit The Stables, Cosgrove Milton Keynes MK19 7JJ Tel: +44 (0) 1908 267111 Fax: +44 (0) 1908 267112 Email: teem-info@neoware. com USA Neoware Systems, Inc. 400 Feheley Drive King of Prussia, PA 19406 Tel: +1. 610. 277. 8300 Fax: +1. 610. 275. 5739 FRANCE Neoware Systems, Inc. 58 rue Pottier, Suite 106 78150 LE CHESNAY Tel: +33 1392 32021 Fax: +33 1392 32039 GERMANY Neoware Systems GmbH Hglwrther Str. 1 D - 81379 Mnchen Tel: +49 (0)7000-NEOWARE Tel: +49 (0)89-41 10 96-0 Fax: +49 (0)89-41 10 96-56 TeemTalk Software Support Telephone: +1. 610. 277. 8300 Web: http://www. neoware. com/support/ Software Version 5. 0. 1 October 2004 Part number: TT5DM-5. 0. 1 Neoware UK Ltd, Host Access Business Unit, The Stables, Cosgrove, Milton Keynes, MK19 7JJ Tel: +44 (0) 1908 267111 Fax: +44 (0) 1908 267112 TeemTalk 1988-2004 Neoware UK Ltd, All Rights Reserved. [. . . ] In Echo mode, keyboard entered data is sent only to the host. The host is then responsible for returning the data to the display. In Character mode, keyboard entered data is sent simultaneously to the host and the display. In Block mode, keyboard entered data is displayed and processed locally, allowing you to edit it before a block of data is sent to the host. Row and Column Factory default: 24 x 80 This option enables you to select one of four display formats: 24 rows x 80 columns 25 rows x 80 columns 24 rows x 132 columns 25 rows x 132 columns The display contents will be cleared when you change the format. 6-52 Setup Menus Turnaround Char Factory default: CR This option specifies the line turnaround character (LTC) that is generated when a Read command is received or one of the block data transmission keys is pressed. Note that selecting DC3 will disable the XON/XOFF inbound and outbound pacing characters. Forcing Insert Factory default: Both This option specifies how an insert command affects displayed data when the screen is full. When set to Off, you will not be able to perform an insert operation. When set to Line, you will be able to insert one or more lines, using the Ins Ln key for example. The contents of the current and all following lines will move down the number of lines inserted, causing the lines originally at the bottom of the display to be discarded. When set to Character, you will be able to insert one or more characters in the current line. Characters to the right of the cursor position will move along. If the Auto Wrap option is set to No, then characters originally at the end of the current line will be discarded. If set to Yes, characters on all following lines will move along, forcing characters at the end of the last line to be discarded. When set to Both, the function of the Line and Character settings will be enabled. Insert Character Factory default: Space The setting of this option determines the effect of pressing the Insert key. When set to Space, a space character will be inserted after the current cursor position. When set to Mode, the emulation will enter Insert mode when the Insert key is pressed. Tab Operation Factory default: Field The setting of this option determines whether tab stops are according to field attribute characters or column-tab definitions. When set to Field, tab stops in a formatted page are provided by field attribute characters. When set to Column, tab stops are provided by column-tab definitions. Field attribute characters are ignored. 6-53 Setup Menus Enter Key Factory default: Return This option enables you to specify whether the Enter key performs the same function as the Return key or the Send key. [. . . ] Host print protocol is not supported. D-4 Product Specification Stratus V102 Specification: V102 Display Terminal Operator's Manual (TVI 131974-00 June 1985). Limitations: Page print flip mode not supported. Serial configuration commands not supported. Select character set commands not supported. Tandem 6526/6530 Emulation Specification: Tandem 653x Multi-Page Terminal Programmer's Guide (82310-B00 December 1983). Limitations: Telnet Line-Mode is not supported. Ansi media copy commands are not supported. [. . . ]