User manual HP DESIGNJET T1200

[. . . ] 2nd edition Legal notices The information contained herein is subject to change without notice. The only warranties for HP Products and services are set forth in the express warranty statement accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. [. . . ] NOTE: If you select neither the paper source nor the paper type, the printer will not print on any protected roll (see Roll protection (T1200 series only) on page 62). Select the print quality (your own choice between speed and quality of printing). eNWW Print a project 87 Printing examples 9. If you intend to print on roll paper, you must decide where the printer should cut the paper. Select the Features tab, then select the Autorotate option. If you have a T1200 series printer, select the Crop lines option also. Autorotation can help to avoid wasting paper, and the crop lines will show you where to cut the paper after printing. Press the OK button and save your configuration changes to a PC3 file. chapter 9 Practical printing examples ENWW 12. When you have pressed the OK button in the Plot window, the printer will construct a print preview (T1200 series only). Using the Embedded Web Server to submit files (T1200 series only) From the HP Utility or the Embedded Web Server, select Job Center > Submit Job. With some Web browsers, you will see the window below; with other Web browsers, the mechanism for adding files is slightly different. Press the Add files button (or Choose File, Add another file) to choose the files from your computer that you want to print. The files must be in one of the following formats: ● ● PDF (T1200 PS only) PostScript (T1200 PS only) ENWW Print a project 89 Printing examples ● ● ● ● TIFF (T1200 PS only) JPEG (T1200 PS only) HP-GL/2 RTL NOTE: When you print to a file, the file should be in one of the above formats, but its name may have an extension such as . If the files are not in one of these formats, they will not be printed successfully. If the jobs have been generated with the appropriate settings (such as page size, rotation, resizing and number of copies), you can just press the Print button and the project will be sent to the printer. If you need to specify printing settings, go to the Job settings section and select the options you need. Each option has explanatory text on the right, so that you can understand the behavior of each setting. Remember that, if you leave the setting as Default, the setting saved in the job will be used. If the job contains no setting, the setting in the printer will be used. Using printer emulation Printer emulation can be requested by selecting Advanced settings > Color > Color management > Printer emulation. You can select Off (no printer emulation) or the name of the printer model that you want to emulate. [. . . ] One way to minimize uncontrolled ESDs, and therefore reduce this type of damage is by touching any exposed grounded part of the product (mainly metal parts) before handling ESD sensitive devices (such as the printheads or ink cartridges). Additionally, to reduce the generation of electrostatic charge in your body try to avoid working in a carpeted area, and keep your body movements to a minimum when handling ESD sensitive devices. Also, avoid working in low humidity environments. Ethernet A popular computer networking technology for local area networks. [. . . ]