User manual HP DESKJET 1180C

[. . . ] hp deskjet 1180c series printer user's guide Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with respect to this information. HEWLETT-PACKARD SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] Check the paper Make sure paper is loaded correctly in the tray and that the paper is not jammed in the printer. Check the print cartridges Make sure that both the black and color print cartridges are properly installed and that the access cover of the printer is closed. The cartridge LED flashes if the print cartridges are not installed correctly. 6-1 ENWW Try printing a sample page Turn the printer off, and then back on. Press the RESUME button and release it when the Resume light starts to blink. If the sample page prints, then the problem is not with the printer. Check the printer setup Make sure your HP Deskjet printer is selected as the current or default printer and that Pause Printing is not checked. Check the network setup Make sure that your printer is properly set up in your network environment. See Use the printer on a network on the "How Do I?" Toolbox help, and the documentation provided by your network vendors. A Blank Page is Ejected Check that the tape is removed from the ink nozzles on the print cartridges. Check for an empty print cartridge If you are printing black text and a blank page is printed, your black print cartridge may be empty. Check the printer setup Make sure your printer is selected as the current or default printer. Check the parallel port on your computer If you are using a parallel cable, make sure your printer is connected directly to the parallel port. Do not share the port with other devices such as a Zip drive. Placement of the Text or Graphics is Wrong The paper size or orientation settings may be incorrect Make sure the paper size and page orientation selected in the software program match the settings in the HP print settings dialog box. The paper may not be loaded correctly If everything on the page is slanted or skewed, make sure the paper width and length guides fit snugly against the left and bottom edges of the paper stack and that there are no more than 150 sheets of paper loaded in the main tray. The margin settings may be wrong If the text or graphics are cut off at the edges of the page, make sure the margin settings for the document do not exceed the printable area of your printer. ENWW 6-2 Something on the Page is Missing or Incorrect The margin settings may be wrong Make sure the margin settings for the document do not exceed the printable area of your printer. Color print settings may be wrong Grayscale might be selected in the HP print settings dialog box. The wrong printer may be selected Make sure the correct printer is selected as the current or default printer. Printer Takes a Long Time to Print a Job Check your system configuration The minimum system configuration for your printer . Refer to "Printer Specifications" for details. There may be insufficient hard disk space in your system For printing on 11 in x 17 in paper, it is recommended that you should have at least 50MB free hard disk space in your system. If you are printing graphics-intensive files, make sure you have enough (more than 50MB) hard disk space. If you are using a parallel connection, try switching to a USB connection. For more information, see "Connecting the Printer to the USB Port". There may be insufficient virtual memory in your system Increase the size of your system's virtual memory. [. . . ] 5 6 # #+E  , # # # !# # # /# # ¾ / # ## ë 1 7 # 8 ENWW Hewlett-Packard Limited Warranty Statement HP product Software Accessories Print cartridges Printer peripheral hardware (see below for details) Extent of Limited Warranty 1 Hewlett-Packard warrants to the end-user customer that the HP products specified above will be free from defects in materials and workmanship for the duration specified above, which duration begins on the date of purchase by the customer. For software products, HP's limited warranty applies only to a failure to execute programming instructions. HP does not warrant that the operation of any product will be uninterrupted or error free. HP's limited warranty covers only those defects that arise as a result of normal use of the product, and does not cover any other problems, including those that arise as a result of: a Improper maintenance or modification; 6 Duration of Limited Warranty 90 days 90 days 90 days 1 year If HP is unable to repair or replace, as applicable, a defective product which is covered by HP's warranty, HP shall, within a reasonable time after being notified of the defect, refund the purchase price for the product. [. . . ]