User manual HP DREAMCOLOR LP2480ZX PROFESSIONAL DISPLAY

[. . . ] HP LP2480zx LCD Monitor User Guide © 2008 Hewlett-Packard Development Company, L. P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] Factory calibrated preset for the Adobe-RGB standard. Factory calibrated preset for the SMPTE-C standard. Factory calibrated preset for the sRGB standard. Factory calibrated emulation preset for the DCI-P3 standard. Note the monitor's color gamut does not fully enclose the DCI-P3 color space. User-calibrated preset that must be set up before use. Adjusts the Luminance/Brightness level of the screen. The control range is 50 ­ 250 cd/m2 with a step size of 1 cd/m2. Adjust the WhitePoint/Color Temp level of the screen. The control range is 4000 ­ 12, 000 K with a step size of 100. Displays Primaries and Gamma information for the active Color Space preset. Returns Color Space preset to the factory calibrated settings. User-7 Luminance/Brightness WhitePoint/Color Temp Primaries and Gamma Information Reset to Factory Calibration Reset to Last Calibration Returns Color Space preset to the last calibrated settings. Image Control Auto Adjustment Horizontal Position Vertical Position Custom Scaling Adjusts the screen image. Adjusts the position of the screen image left and right. Adjusts the position of the screen image up and down. Selects the method on how displayed information on the monitor will be formatted. Select: 24 Chapter 4 Operating the Monitor Table 4-2 OSD Menu (continued) Icon Main Menu Submenu Description Fill to Screen--image fills the entire screen and may look distorted or elongated because of non-proportional scaling of height and width Fill to Aspect Ratio--image is sized to fit the screen and maintains proportional image One-to-one--disables video scaling, displays an image that is smaller in size than the monitor's capability and centers the image on the screen in the active viewing area Overscan--enables over-scanning of the image for HDMI, Component, S-video, and Composite inputs Crop Right Side--crops the video on the right side of the image (enabled for the supported horizontal resolutions over 1920 pixels) Crop Left Side--crops the video on the left side of the image (enabled for the supported horizontal resolutions over 1920 pixels) Crop Left and Right (Center)--crops the video on the left and right sides in equal amounts and centers the image (enabled for the supported horizontal resolutions over 1920 pixels) Clock Minimizes any vertical bars or strips visible on the screen background. Adjusting the Clock will also change the horizontal screen image. This adjustment allows you to remove any horizontal noise and clear or sharpen the image of characters. Adjusts the black level or offset of the monitor. The factory default value is 128 (no offset) and the range is 0 to 255. Disables or enables the overdrive feature. [. . . ] This feature allows the monitor to operate on input voltages between 100­120V or 200­240V. The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you purchased the equipment. If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. [. . . ]