User manual HP DX2810

[. . . ] The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. [. . . ] 4 Computer Setup--Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Computer Setup--Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Recovering the Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ENWW v vi ENWW Computer Setup (F10) Utility Computer Setup (F10) Utilities Use Computer Setup (F10) Utility to do the following: Change factory default settings. Set, view, change, or verify the system configuration, including settings for graphics, audio, storage, communications, and input devices. Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, or USB flash media devices. Establish a supervisor password that controls access to Computer Setup (F10) Utility and the settings described in this section. Using Computer Setup (F10) Utilities Computer Setup can be accessed only by turning the computer on or restarting the system. To access the Computer Setup Utilities menu, complete the following steps: 1. As soon as the computer is turned on, press F10 when the monitor light turns green to enter Computer Setup. NOTE: If you do not press F10 at the appropriate time, you must restart the computer and again press F10 when the monitor light turns green to access the utility. The Computer Setup Utility screen is divided into menu headings and actions. Five menu headings appear on the Computer Setup Utility screen: Main Advanced Power Boot Exit ENWW Computer Setup (F10) Utilities 1 Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the previous screen, press Esc. CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen. Computer Setup--Main NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 1 Computer Setup--Main Option System Time System Date Floppy Diskette A: Description Allows you to set system time. Allows you to set drive A to: 1st Drive 2nd Drive 3rd Drive 4th Drive Disabled 1. 44 MB 3. 5" Not Installed For each, allows you to: (view only) Capacity (Size - HDD only) Transfer Mode Smart Support - run HDD self-test for selected channel: SMART Status Check SMART Short Self-Test SMART Extended Self-Test System Information (view only) CPU Type CPU Speed Cache RAM Installed Memory Memory Bank 1 Memory Bank 2 Memory Bank 3 Memory Bank 4 BIOS Revision Core Version 2 Computer Setup (F10) Utility ENWW Product Name Product Number Serial Number UUID Asset Tag (press Enter to change) Computer Setup--Advanced NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Setting items on this menu to incorrect values may cause your system to malfunction. Table 2 Computer Setup--Advanced Option Primary Video Adapter Description Allows you to select the boot display device when more than 2 video options are offered by the system: PS/2 Mouse Onboard PCI-Ex16 Allows you to set: Disabled Enabled Auto Detect Internal Speaker Allows you to set the internal speaker to: Disabled Enabled Supervisor Password User Password Change Supervisor Password Power On Password Onboard Video Memory Size Allows you to change supervisor password. [. . . ] Floppy Group Boot Priority CD-ROM Group Boot Priority Specifies boot device priority within removable devices. Specifies boot device priority within CD/DVD drives. Hard Drive Group Boot Specifies boot device priority within hard drives. Priority Network Group Boot Priority Specifies boot device priority within bootable network devices. Computer Setup--Exit NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 5 Computer Setup--Exit Option Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Description Press Enter to exit saving changes. [. . . ]