User manual HP E-COMMERCE SERVER ACCELERATOR SA7100

[. . . ] hp e-commerce server accelerator sa7100/sa7120 user guide © Copyright 2001 Hewlett-Packard Company. Hewlett-Packard Company 3000 Hanover Street Palo Alto, CA 94304-1185 Publication Number 5971-0894 February 2001 Disclaimer The information contained in this document is subject to change without notice. HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] Syntax: HP SA7120> set ssh <enable|disable> show ssh Display current SSH status: enabled or disabled. Example: HP SA7120> show ssh SSH: disabled set ssh_port Set the port on which SSH connections are accepted. (Default port: 22. ) Syntax: HP SA7120> set ssh_port <port> where <port> is the number of the port to which SSH sessions will connect. show ssh_port Display port on which SSH sessions are currently accepted. Example: HP SA7120> show ssh_port SSH Port Number: 22 setsnmp Enable or disable the SNMP agent. When enabled, you can set configure SNMP information and parameters (see setsnmp snmp_info, below) for the SA7100/SA7120. Syntax: HP SA7120> setsnmp <enable|disable> showsnmp snmp Displays the current status of the SNMP agent: enabled or disabled. Example: HP SA7120> showsnmp snmp SNMP: Enabled 75 CHAPTER 5 HP e-Commerce Server Accelerator SA7100/SA7120 User Guide Command setsnmp snmp_info Description Set the following SNMP information and parameters: · · · · · SNMP port (Default: 161) SNMP trap port (Default: 162) Contact person System name System location Example: HP SA7120> setsnmp snmp_info SNMP Port [161]: 161 SNMP Trap Port [162]: 162 Contact Person []: support System Location []:Palo Alto System Name []: SA7120 showsnmp snmp_info Display the currently effective SNMP information and parameters. Example: HP SA7120> showsnmp snmp_info SNMP Port Number : 161 SNMP Trap Port Number: 162 SNMP System Contact : support SNMP System Name : SA7120 SNMP System Location : Palo Alto System IP Address : 10. 1. 2. 124 System Netmask : 255. 255. 255. 0 Default Route : None setsnmp snmp_community Set SNMP community strings. Example: HP SA7120> setsnmp snmp_community IP []:xxx. xxx. xxx. xxx Community String []:<string> 76 CHAPTER 5 Command Reference Command list snmp_community Description Display currently configured SNMP community strings. Example: HP SA7120> list snmp_community <2> Current SNMP Community String(s): 1. ) IP: 0. 0. 0. 0 => String: public 2. ) IP: 0. 0. 0. 0 => String: private delete snmp_community Delete SNMP community strings. Example: HP SA7120> delete snmp_commmunity SNMP Community String(s) Deletion. <2> Current Available SNMP Community 1. ) IP: 0. 0. 0. 0 => String: 2. ) IP: 0. 0. 0. 0 => String: Enter number (1 to 2) to delete (q to Enter number (1 to 2) to delete (q to String(s): public private quit) [1]: 2 quit) [1]: q setsnmp trap_authen When enabled, the SNMP manager receives traps upon failed authentication attempts. Example: HP SA7120> setsnmp trap_authen <enable|disable> shownmp trap_authen Displays current status of trap authentication trap. Example: HP SA7120> showsnmp trap_authen Trap Authentication: enabled setsnmp trap_community Sets SNMP trap community strings. Example: HP SA7120> setsnmp trap_community SNMP Trap Community String(s) Setting. Enter a SNMP Trap Community IP (q to quit): 0. 0. 0. 0 Enter a SNMP Trap Community String (q to quit): private Enter a SNMP Trap Community IP (q to quit): 0. 0. 0. 0 Enter a SNMP Trap Community String (q to quit): public Enter a SNMP Trap Community IP (q to quit): q 77 CHAPTER 5 HP e-Commerce Server Accelerator SA7100/SA7120 User Guide Command list trap_community Description Display SNMP trap community strings. Example: HP SA7120> list trap_community SNMP Trap Community String(s) information. <2> Current SNMP Trap Community String(s): 1. ) IP: 0. 0. 0. 0 => String: public 2. ) IP: 0. 0. 0. 0 => String: private delete trap_community Delete SNMP trap community strings. Example: HP SA7120> delete trap_community SNMP Trap Community String(s) Deletion. <2> Current Available SNMP Trap Community String(s): 1. ) IP: 0. 0. 0. 0 => String: public 2. ) IP: 0. 0. 0. 0 => String: private Enter number (1 to 2) to delete (q to quit) [1]: 2 Enter number (1 to 2) to delete (q to quit) [1]: q 78 CHAPTER 5 Command Reference Alarms and Monitoring Commands Command set alarms Description Enable all or a selection of the SA7120's alarms. Syntax: HP SA7120> set alarms <all none esc rsc utl ovl nls> where all enables all five of the SA7120's alarms. esc enables the Encryption Status Change Alarm. rsc enables the Refused SSL Connection Alarm utl enables the Utilization Threshold Alarm ovl enables the Overload Alarm nls enables the Network Link Status Alarm To disable all alarms, use none: Example: HP SA7120> set alarms all HP SA7120> show alarms Alarms set: esc rsc utl ovl nls show alarms Display the list of currently enabled alarms. [. . . ] A mechanism used in the Internet for translating the names of host computers into addresses. Permanent (non-volatile) storage for configuration changes. Cascading Certificate Cipher DNS Flash GLOSSARY HP e-Commerce Server Accelerator SA7100/SA7120 User Guide Fulfillment Server HTTP HTTPS Inline IP IP Address IP Service Key Key Strength Keypair Load Balancing A server that stores content used to satisfy user requests. Hypertext Transfer Protocol: the protocol used between a Web browser and a server to request a document and transfer its contents. HTTP exchanged over an SSL-encrypted session. [. . . ]