User manual HP EVO N610C

[. . . ] b Getting Started Evo Notebook N610c Series Document Part Number: 279359-001 July 2002 This guide explains how to set up your hardware and software, identify the exterior components of the notebook, find and install the latest versions of Compaq software, and find additional information and support. © 2002 Compaq Information Technologies Group, L. P. Compaq, the Compaq logo, Evo, RomPaq, and SoftPaq are trademarks of Compaq Information Technologies Group, L. P. Microsoft and Windows are trademarks of Microsoft Corporation in the U. S. All other product names mentioned herein may be trademarks of their respective companies. [. . . ] of Authenticity label 9 may vary by Bottom Components 1 MultiBay recess Provides a grip area for removing an optional MultiBay device from the MultiBay. Releases an optional MultiBay device from the MultiBay. Provides regulatory information about the notebook. 2 MultiBay release latch 3 System label Getting Started 2­13 A Look at the Notebook Bottom Components (Continued) 4 Serial number Identifies the notebook. need this number You mayCompaq customerif you call support. 5 Docking restraint latch recess Helps secure the notebook to a Port Replicator. Provide airflow to cool internal components. 6 Intake vents Ä To prevent overheating, do not obstruct vents. Using the notebook on a soft surface, such as a pillow, rug, or thick clothing, may block airflow. 7 Hard drive bay 8 Modem agency approvals label Secures the primary hard drive in the hard drive bay. Lists the countries in which the modem has been approved for use. You will need this the information to use modem while traveling internationally. 9 Certificate of Authenticity label Contains your Product Key number, which will be needed to update or troubleshoot your operating system. Contains the mini PCI modem card. - Mini PCI (Peripheral Component Interconnect) compartment q Battery release latch w Battery bay Releases the primary battery pack from the battery bay. Holds the primary battery pack. 2­14 Getting Started A Look at the Notebook Additional Standard Components The components included with the notebook vary by geographical region and the notebook hardware configuration ordered. The following illustration and table identify the standard external components included with most notebook models. not include or This illustration doesthe hard driveprinted documentationpack, components such as and primary battery which ship inside notebook bays identified in previous sections. Identifying additional standard components Getting Started 2­15 A Look at the Notebook Additional Standard Components 1 Power cord 2 Modem cable Connects the AC Adapter to an AC electrical outlet. Connects the modem to an RJ-11 telephone jack or to a country-specific modem adapter. cable has The modem connector a 6-pin RJ-11 at each end. 3 Country-specific modem adapter (included with internal modem models by region as required) Adapts the modem cable to a non-RJ-11 telephone jack. 4 Network cable Connects the notebook to an Ethernet network jack. cable has an The network connector at 8-pin RJ-45 each end. 5 AC Adapter 6 Weight saver Converts AC power to DC power. Protects the MultiBay and reduces notebook weight when a MultiBay device is not inserted. Connects the AC Adapter to a 2-prong electrical outlet. 7 Japan-specific outlet adapter (Japan only) 2­16 Getting Started A Look at the Notebook Additional Standard Components (Continued) 8 Documentation Library CD Contains the following guides: I I I I I I I I Hardware Guide Software Guide Modem and Networking Modem Command Guidelines (Advanced Users Only) Maintenance, Shipping and Travel Troubleshooting Regulatory and Safety Notices Safety & Comfort Guide 9 QuickRestore kit - Bag containing 2 spare pointing stick caps (pointing stick and dual pointing device models only) Contains the software preinstalled on the notebook. Replace worn pointing stick cap. Getting Started 2­17 3 How to Get Information, Help and Updates Using the Documentation Library CD Included with the notebook is the Documentation Library CD, which contains detailed information and instructions for using your notebook: I Hardware Guide--Contains information specific to your notebook. It includes an illustrated reference to all exterior components and detailed steps for replacing battery packs, using keyboard features and drives, connecting external equipment, and upgrading the notebook. Feature guides on these topics: I Software Guide--describes Compaq software, including details about power and security features. Modem and Networking guide--provides details about modem connections and equipment. Modem Command Guidelines (Advanced Users Only)--contains modem commands and programming information. Maintenance, Shipping and Travel guide--details steps for notebook maintenance and guidelines for using the notebook internationally. [. . . ] In Windows Explorer, select My Computer > the hard drive designation (usually, drive C) > Compaq. In the Compaq folder, select the name or number of the software package containing the update. Select the file that includes an . exe extension, for example, Filename. exe. To complete the installation, follow the instructions on the screen. [. . . ]