User manual HP FP5315

[. . . ] User's Guide vf15/vf17, FP15/FP17, L1502/L1702, f1523/f1723, FP5315/FP7317 Flat Panel Monitors Document Part Number: 322638-003 April 2003 This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. © 2003 Hewlett-Packard Develoment Company, L. P. HP, Hewlett Packard, and the Hewlett-Packard logo are trademarks of Hewlett-Packard Company in the U. S. Compaq and the Compaq logo are trademarks of Hewlett-Packard Development Company, L. P. Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the U. S. [. . . ] · When OSD is inactive, auto-adjusts the screen image. · When OSD is active, navigates in reverse through the OSD and adjusts OSD scale settings. ­ (Minus button) 5 + (Plus button) When the OSD is active, navigates through the OSD and adjusts OSD scale settings. 4­2 User's Guide Operating the Monitor No. Control 6 (Volume control) 7 Power LED Function Controls the volume level of the monitor speakers. Fully powered = Green. Powers the monitor on and off. 8 Power Switch FP15, FP17, L1502, L1702, vf15, and vf17 Monitors No. Control 1 2 Menu button Function Launches the On-Screen Display (OSD) menu and selects functions. · When OSD is inactive, auto-adjusts the screen image. · When OSD is active, navigates in reverse through the OSD and adjusts OSD scale settings. ­ (Minus button) User's Guide 4­3 Operating the Monitor No. Control 3 4 Function When the OSD is active, navigates through the OSD and adjusts OSD scale settings. Powers the monitor on and off. + (Plus button) Power LED 5 Power Switch Adjusting Monitor Settings Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. If the monitor is not already on, press the Power switch to turn on the monitor. To access the OSD Menu, press the Menu button on the monitor's front panel. 4­4 User's Guide Operating the Monitor 3. To navigate through the OSD Menu, press the + (Plus) button on the monitor's front panel to scroll up, or the ­ (Minus) button to scroll in reverse. To select an item from the OSD Menu, use the + or ­ buttons to scroll to and highlight your selection, then press the Menu button to select that function. Adjust the item using the + or ­ buttons on the front panel to adjust the scale. After adjusting the function, select Save and Return, or Cancel if you don't want to save the setting, then select Exit from the Main Menu. for 10 seconds while displaying If the buttons remain untoucheddiscarded and the settings will a menu, new adjustments will be revert to previous settings and exit the menu. Using the On-Screen Display There are two On-Screen Display menus available; one for basic adjustments, and one for advanced adjustments. To access the Basic OSD Menu, press the menu button on the monitor's front panel. Basic OSD Menu Levels Menu Level 1 Brightness Contrast Auto Adjustment Menu Level 2 Adjustment Scale Adjustment Scale User's Guide 4­5 Operating the Monitor Basic OSD Menu Levels Menu Level 1 Advanced Menu Exit Menu Level 2 To access the Advanced OSD Menu, press the menu button again, or select Advanced Menu from the Basic OSD Menu. Menu After selecting the Advanced defaultfrom the Basic Menu, the Advanced Menu remains the OSD on subsequent power-ups of the monitor until the Basic Menu is selected or Factory Reset is applied. The Advanced OSD Menu has up to three sublevels and can be viewed in one of six available languages. The following table provides the menus and their functions at each level: Advanced OSD Menu Levels Level 2 Level 3 Adjustment Scale Adjustment Scale Auto Adjustment Horizontal Position Vertical Position Clock Clock Phase Cancel Save and Return Color 9300 K 6500 K Y "Adjusting" Message Adjustment Scale Adjustment Scale Adjustment Scale Adjustment Scale Level 1 Brightness Contrast Image Control Factory Reset Y Y Y Y Y Y Y 4­6 User's Guide Operating the Monitor Advanced OSD Menu Levels (Continued) Level 1 Level 2 Level 3 Factory Reset Custom Color Cancel Save and Return Language Deutsch English Espanol Francais Italiano Nederlands Cancel Save and Return Management Power Saver Power On Recall Mode Display Sleep Timer Basic Menu Cancel Save and Return OSD Control Horizontal Position Vertical Position OSD Timeout Cancel Save and Return Factory Reset Exit Yes No Adjustment Scale Adjustment Scale Adjustment Scale Y Y Y On / Off Selection On / Off Selection On / Off Selection Timer Menu N N N N Custom Color Adjustment User's Guide 4­7 Operating the Monitor Adjusting Screen Quality Allow the monitor to warm up for 20 minutes before performing the following procedures. The Auto-adjustment feature automatically fine-tunes the image quality each time a new video mode is displayed. [. . . ] Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product, contact: Hewlett Packard Company P. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call1 1-800- 652-6672 For questions regarding this FCC declaration, contact: Hewlett Packard Company P. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. C­2 User's Guide Agency Regulatory Notices Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. [. . . ]